Only 450 Hours!

Options:
Remote Jog Handle,
Auto Tool Presetter,
High pressure thru tool coolant (300#) with skimmer,
Sub spindle airblast option,
Intuitive Programming,
Early Power Failure Detection,
Chip Conveyor,
High Intensity Lighting,
3" Bar capacity and A2-6 spindle nose.
10 different tool holders,
2 Axial motors and 1 radial motor.


The Tool Holder List:


1" Facing tool holder 3
3/4" Round bar hldr dbl 1
1" Round bar hldr 3
1.25" Rounnd bar hldr 1
1.5" Rounnd bar hldr 2
Axial motor 2
Radial motor 1
Various little wedge shaped devices used to hold 1 inch bars directly to the turret.


SWING DIAMETER S.A.E.
Over Front Apron 31.75 "
Over Cross Slide 20.75 "
Over Second Spindle 21.75 "
CAPACITIES S.A.E.
Chuck Size 8.3 "
Max Cutting Diameter (varies with turret) 18.0 "
Max Cutting Length (without workholding) 23 "
Bar Capacity 2.0 "
TRAVELS & FEEDRATES S.A.E.
X Axis 12.5 "
Y Axis ±2.00 "
Z Axis 23 "
Rapids on X 472 in/min
Rapids on Y 472 in/min
Rapids on Z 945 in/min
Max Thrust X 4100 lb
Max Thrust Y 2300 lb
Max Thrust Z 5100 lb
SPINDLE S.A.E.
Max Rating 30 hp
Max Speed 4000 rpm
Max Torque 300 ft-lb @ 500 rpm
Spindle Nose A2-6
Spindle Bore ø 3.50 "
MAIN SPINDLE C AXIS S.A.E.
Max Rating 5 hp
Positioning (±) 0.01 °
Brake Clamp Force 1000 lb
Brake Diameter 14.4 "
Control Type Interpolated Motion & Positioning
SECONDARY SPINDLE S.A.E.
Max Rating 20 hp
Max Speed 4000 rpm
Max Torque 135 ft-lb @ 700 rpm
Spindle Nose A2-5
Chuck Size 8.3 "
Spindle Bore ø 2.44 "
SECONDARY SPINDLE POSITIONING S.A.E.
Brake Clamp Force 500 lb
Brake Diameter 7 "
Control Type Positioning Only
TURRET S.A.E.
Number of Tools 12 Stations
OD vs ID Tools Hybrid 6 BOT/6 VDI
Boring Bar Rear Clearance (from back of turret ) 4.0 "
LIVE TOOLING S.A.E.
Max Speed 6000 rpm
Drive Ratio 1:1
Tooling VDI40
GENERAL S.A.E.
Air Required 4 scfm, 100 psi
Coolant Capacity 55 gal

This machine is listed for sale by International Machine located in Orion Township, Michigan