We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will change over time. Call us to confirm details of a particular machine as well as stock levels before deciding to purchase

Make: Sharp
Model #: 1860LV
Condition: NEW
Features:
D1-8 Camlock, 3 1/16” Hole
¨ Direct Selection For Inch/Metric Threads
¨ One Piece Cast Meehanite Bed
¨ 7-1/2 Hp Spindle Motor
¨ Digital Variable Speed (20-2,000 RPM)
Digital Variable Head on “LV” Models wired at 220v only. (440V optional)

Specifications:
Capacities:
Swing Over Bed 18.5”
Swing Over Cross Slide 11”
Center Height 9.25"
Swing Over Gap 27-1/8”
With of Gap 11.75”
Center height form top of compound 1.9”
Distance Between Centers 60”

Headstock:
Spindle Nose Type D1-8 Camlock
Spindle Bore 3- 1/16”
Spindle Speeds (DIGITAL VARIABLE SPEED)- 20-2,000 rpm
Taper of Spindle Bore MT#6
Taper of Center MT#4

Threads and Feeds:
Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
Cross Feeds – in / rev {#} 0.0001 –0.0094” {12}
Inch Threads (#) 4-56 tpi {36}
Metric and Module Threads {#} 0.5-7mm {17}
D.P. Threads (36) 4-56 mm
Leadscrew Pitch, Diameter 4 tpi, 1-3/8”

Carraige
Cross Slide Travel 9 7/8”
Compound Rest Travel 5.3”
Compound Width 5.0”

Bed
Bed Length 79”
Bed Width 11-3/4”

Tailstock:
Quill Travel (graduated) 5 1/2”
Quill Diameter 2-11/16”
Quill Taper MT#4

General:
Spindle Motor (220V or 440V, 60, 3) 7-1/2 hp
Net Weight (approx.) 4,500 LBS
Dimension (LXBXH) 104.3" x 31.9" x 48"

Standard Accessories:
3-Jaw Chuck 10”
Coolant System
Face Plate (16”)
Steady Rest (1/2” – 6”)
American Tool Post
Full Length Splash Guard
Halogen work Light
Follow Rest
Longitudinal Carriage Stops
Tailstock and Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, Can of Paint

Optional Accessories: (Please call for pricing and additional information)
3 - Jaw 12” Chuck (BTC) in lieu of the 3 - Jaw 10” (Standard Equipment)
3 - Jaw 12" Chuck (BTC)
4 - Jaw 12” Chuck (BTC)
3 - Jaw Chuck 10” (Bison)
3 - Jaw Chuck 12” (Bison)
3 - Jaw Chuck 16” (Bison)
4 - Jaw Chuck 12” (Bison)
4 - Jaw Chuck 16” (Bison)
Chuck Guard( factory order only)
Tool guard ( factory order only)
Lead screw guard ( factory order only)
Guard behind spindle( factory order only)
UL/CSA switch board/UL motor/CSA pump in lieu of regular version
Micrometer Carriage Stop
380V, 440V, 575V Transformer (for “LV”Model)
4-Way Toolpost for 16” Swing Lathe
Taper Attachment
Roller Jaws for Steady Rest
(Extra) Steady Rest 18” for Lathes (1/2 – 6” Capacity)
Steady Rest for 18" Lathe (4 - 9" Capacity)
Drill & Arbor (JACOBS)
Quick Change Tool (7 pcs) Holder Set (Aloris)
Live Center – Royal (Dual Bearing) MT#4
Live Center – MT#4
5C Collet Set (1/8” to 1-1/16” by 1/16”) 16 pcs.
5C Lever Collet Closer for 16 / 18” Lathe (JFK)
Factory installation - 5C Lever Collet Closer

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall con

This machine is listed for sale by MachineStation located in Chino, California