We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will change over time. Call us to confirm details of a particular machine as well as stock levels before deciding to purchase

Make: Sharp
Model #: 2660C
Condition: NEW
Features:
¨ D1-8 Camlock,
¨ 3-1/8” Spindle Bore
¨ Direct Selection For Inch/Metric Threads
¨ One Piece Cast Meehanite Bed
¨ 15 Hp Spindle Motor
¨ Single Speed to Start Motor
12-Speed Gear Head (15-1,500 Rpm)
Specifications:
Capacities:
Swing Over Bed 26”
Swing Over Cross Slide 17.24”
Center Height 13"
Swing Over Gap, width 35”
Distance Between Centers 60”

Headstock:
Spindle Nose Type D1-8 Camlock
Spindle Bore 3- 1/8”
Spindle Speeds (12) 15-1500 rpm
Taper of Spindle Bore MT#7
Taper of Center MT#5

Threads and Feeds:
Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
Cross Feeds – in / rev {#} 0.0005 –0.0018” {17}
Inch Threads (#) 2-56 tpi {44}
Metric and Module Threads {#} 0.5-14mm (24)
D.P. Threads (36) 4-56 mm
Leadscrew Pitch, Diameter 4 tpi, 1-1/2”
Carraige
Cross Slide Travel 14.75”
Compound Rest Travel 8”
Compound Width 6”

Bed
Bed Length 110.5”
Bed Width 15.75”

Tailstock:
Quill Travel (graduated) 6 1/2”
Quill Diameter 3.34”
Quill Taper MT#5

General:
Spindle Motor (220V or 440V, 60, 3) 15 hp
Net Weight (approx.) 5830 Lbs
Dimensions (LXWXH) 114" x 40.5" x 51.5"

Standard Accessories:
4-Jaw Chuck 14”
Coolant System
4 way toolpost
Halogen Work Light
Face Plate 20”
12 “ Steady Rest (3.1” to 10.6”)
4-Way Carriage Stop
Splash Guard
Chuck Guard
Tool Kit

Optional Accessories: (Please call for pricing and additional information)
3 - Jaw Chuck 10” (Bison)
3 - Jaw Chuck 12” (Bison)
3 - Jaw Chuck 16” (Bison)
4 - Jaw Chuck 16” (Bison)
Follow Rest
Roller jaws (set of 3)
Quick Change Tool Holder Set (Aloris, CA#4)
Taper Attachment (Factory Installed)
Drill & Arbor (JACOBS)
Live Center – Royal (Dual Bearing) MT#5
Live Center – MT#5
5C COLLET CLOSER
5C collet set (1/8”-1-1/16” by 1/16”), 16 pcs
Steady Rest 15”
Steady Rest 19.5” for 26” Lathe Only
Micrometer carriage stop

DIGITAL READOUT SYSTEMS:
Fagor 20i D.R.O.
Acu-Rite 200S D.R.O.
Newall DP700 D.R.O.

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall continue for ninety (90) days or for the remainder of the original Limited Warranty, whichever is longer.

MACHINE USE AND SAFETY: Buyer acknowledges that the Seller has no knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

This machine is listed for sale by MachineStation located in Chino, California