We are an authorized dealer of Sharp Machinery. Please keep in mind that Sharp is constantly looking for new technology and design to enhance the quality and features of its products. Specifications and features will change over time. Call us to confirm details of a particular machine as well as stock levels before deciding to purchase

Make: Sharp
Model #: 2280B
Condition: NEW
Features:
¨ D1-11 Camlock,
¨ 4.5” Spindle Bore
¨ Direct Selection For Inch/Metric Threads
¨ One Piece Cast Meehanite Bed
¨ 15 Hp Motor
¨ 12-Speed Gear Head (10-1,000 Rpm)

Specifications:
Capacities:
Swing Over Bed 22”
Swing Over Cross Slide 13.2”
Center Height 11"
Swing Over Gap, 31”
Distance Between Centers 80”

Headstock:
Spindle Nose Type D1-11 Camlock
Spindle Bore 4.5”
Spindle Speeds (12) 10-1000 rpm
Taper of Spindle Bore MT#7
Taper of Center MT#5

Threads and Feeds:
Longitudinal Feeds – in/rev (18) 0.002 - 0.032”
Cross Feeds – in / rev {#} 0.001 –0.0094” {17}
Inch Threads (#) 2-56 tpi {44}
Metric and Module Threads {#} 0.5-14mm (24)
D.P. Threads (36) 4-56 mm
Leadscrew Pitch, Diameter 4 tpi, 1-1/2”

Carraige
Cross Slide Travel 14.75”
Compound Rest Travel 8”
Compound Width 6”

Bed
Bed Length 103.5”
Bed Width 15.75”

Tailstock:
Quill Travel (graduated) 6 1/2”
Quill Diameter 3”
Quill Taper MT#5

General:
Spindle Motor (220V or 440V, 60, 3) 15 hp
Net Weight (approx.) 6380 Lbs
Dimensions (LXWXH) 136.6" x 40.5" x 49.6"
Standard Accessories:
4-Jaw Chuck 16”
Coolant System
4 way toolpost
Halogen Work Light
Face Plate 20”
12 “ Steady Rest (4” to 11.5”)
4-Way Carriage Stop
Splash Guard
16" Chuck Guard
TailStock
Follow Rest
Wired 220V or 440V
Tool Kit
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, and Can of Paint
Optional Accessories: (Please call for pricing and additional information)
3 - Jaw Chuck 12” D1-11 (Bison) - 4.05" Bore
3 - Jaw Chuck 16” D1-11 (Bison) - 5.34" Bore
4 - Jaw Chuck 16” D1-11 (Bison)
3 - Jaw Chuck 15” D1-11 (BTC)
4 - Jaw Chuck 16” D1-11 (BTC)
Taper Attachment (Factory Installed)
Drill & Arbor (JACOBS)
Quick Change Tool Holder (Aloris) 7 pcs.
Live Center – Royal (Dual Bearing) MT#5
Live Center – MT#5
5C Lever Collet Closer
Factory Installation - 5C Collet Closer
5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs.
Micrometer Carriage Stop
Steady Rest 15”
Steady Rest 12”
Roller Jaws Set (3 pcs)
Tool guard with limited switch ( factory order only)
Chuck guard with limited switch ( factory order only)
Lead screw guard ( factory order only)

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall continue for ninety (90)

This machine is listed for sale by MachineStation located in Chino, California