SPECIFICATIONS

WHEEL SPINDLE SPEED: 4500 RPM
WHEEL SPINDLE SPEED, 2-SPEED MOTOR: 2250/4500 RPM
GRINDING WHEEL DIAMETER: 4”
COLLET CAPACITY: 5/8” ROUND, 1/2” SQUARE
MAXIMUM GRINDING RADIUS: 3/4”
MAXIMUM OFF-CENTER ADJUSTMENT: 3/4”
INDEXING DIVIDING DISC: 24
SPINDLE GRADUATION: 360 DEGREES
MAXIMUM ADJUSTABLE CLEARANCE ANGLE: 45 DEGREES (APPROX)
TRANSVERSE FINE ADJUSTMENT OF
TOOL-CARRIER: 20 MM (APPROX)
DIMENSIONS OF HOUSING: 16” X 12” X 18” H
WEIGHT: 90 LBS

FEATURES:

• MACHINE HOUSING IS OF STURDY COMPACT DESIGN WITH BUILT-IN DUST PROTECTION MOTOR. GRINDING WHEEL SPINDLE RUNS FREE OF VIBRATION.
• DRIVING BELT, SPINDLE, ADJUSTMENT FOR BELT TENSION, AND SWITCH ARE TOTALLY ENCLOSED IN THE HOUSING – BEST SAFETY AGAINST ACCIDENTS IS PROVIDED.
• UNIQUE DISTRIBUTION OF ALL OPERATING ELEMENTS AND ADJUSTMENTS.
• GRINDER ENABLES TO GRIND NUMEROUS PROFILES FROM COMPACT MATERIAL
• THE GRINDING SPINDLE IS BEARED IN SELF-REGULATING ROLLER-BEARINGS.
• THE FITTING OF THE GRINDING DISCS ENABLES A RAPID CHANGE OF THE GRINDING WHEELS. IF THE GRINDING WHEEL IS ONCE ADJUSTED AND RECTIFIED ON THE FITTING, IT MOVES AGAIN CENTRICALLY EVEN AFTER A CERTAIN CHANGE. IT IS THEREFORE RECOMMENDED TO UTILIZE A GRINDING DISC FITTING FOR EACH GRINDING WHEEL.
• THE COMPLETE TOOL-CARRIER MAY BE MOVED ON THE ROUND GUIDE FOR 4.3”.
• THE FINE ADJUSTMENT IN THE RANGE OF 0.78” IS EFFECTED BY MOVING THE MICROMETER SCREW SITUATED AT THE SIDE OF THE MACHINE BODY.
• THE STOP IN RADIAL DIRECTION IS REGULATED WITH THE ADJUSTING SCREW AT THE FRONT SIDE OF THE MACHINE BODY.
• GRINDING ANGLE AND RELIEF-GRINDING ANGLE EXISTS AT THE CENTER SLEEVE SCALE.
• THE COLLET CENTER SLEEVE WITH A DIAMETER OF 0.78” IS DESIGNED TO ALLOW THE GRINDING OF CUTTERS AND PINS OF ANY LENGTH.

This machine is listed for sale by located in Bethlehem, Pennsylvania