Make: Sharp
Model #: SVL-3320S-M
Condition: NEW
Features:
Linear Guideway construction
8,000 rpm (10K or 12K opt) spindle
15 HP, Cat 40 spindle
Rapid traverse of 1,417 ipm
Position accuracy 0.0002" +/- inch (0.005 mm)
Repeatability 0.00012" +/- inch (0.003 mm)

Specifications:
Work Capacity:
Travel X,Y,Z: 33.5" x 20.1" x 22" (850mm x 510mm x 560mm)
Spindle Nose to Table: 5.9 - 27.9" (150mm - 710mm)
Spindle Center to Column: 24" (608mm)
Work Table:
Table Area: 39.4" x 19.7" (1,000mm x 500mm)
Maximum Workpiece Weight: 1,100 lbs (500 kg)

Spindle:
Spindle Taper: CAT 40
Spindle Max. Speed: 8,000 rpm
Driving Type: Belt Drive
Spindle Motor: 12.1/14.7(9/11 kW)
Rapid Traverse X/Y Axis: 1,417 ipm (36,000 mm/min)
Rapid Traverse Z Axis: 1,417 ipm (36,000 mm/min)
Cutting Feed Rate: 0.04~1,417 (1~36,000)

Automatic Tool Changer (ATC):
Magazine Type: Carousel 20T
Tool Selection Type: Set Tool Number
Max. Tool Diameter: 3.9" (100mm)
W/O Adj. Tool, Max. Dia: 5.9" (150mm)
Max Tool Length: 9.8" (250mm)
Max Tool Weight: 15.4 lbs (7 Kg)

Accuracy:
Positioning Accuracy: 0.0002/0.005"
Repeatability Accuracy: 0.00012"/0.003"

Coolant System:
Flood Coolant Nozzles: 6
Coolant Tank Capacity: 63 Gal. (240 L)
Chip Pan: Standard

Machine Size:
Floor Space (w/o Chip Conveyor): 109.4" x 84.6" x 101.2"
Weight: 11,000 lbs. (5,000 Kg)

Power Requirement:
Electrical: 220V/3 Phase/ 20 KVA/60 Hz
Air: 6 CFM @ 88 psi

Standard Equipment:
Siemens 828D Control, 8.4 LCD Screen
Cycle 832 (AICC) (50-block look-ahead)
Advanced Surface (Nano Smoothing)
1M Memory
USB Port
CF Card
RS-232C Interface
Embedded Ethernet
Shop Mill / Shop Turn
Rigid Tapping
Coolant Gun
Air Gun
Fluorescent work light
Leveling Bolts and Pads
Fully enclosed splash guard
Adjusting Tool with Tool Box
Alarm light
Electric Cabinet Heat Exchanger
4 Additional M Codes
3 Axes Telescopic Covers
Removable hand wheel M.P.G.
Door Interlock
M30 Auto Power OFF
Air Accumulator
Spindle around Cutting Coolant

Optional Accessories: (Please call for pricing and additional information)
4 Axes Simultaneously
Network Drive
4/5 Axis kit prepare
CTS 70 bar (1,000 psi) kit prepare
Spindle Oil Chiller
Hinge/Flat Type Chip Conveyor

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall continue for ninety (90) days or for the remainder of the original Limited Warranty, whichever is longer.

MACHINE USE AND SAFETY: Buyer acknowledges that the Seller has no knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

This machine is listed for sale by MachineStation located in Chino, California