Make: Sharp
Model #: SVL-2416SE-F
Condition: NEW

Features:
24" x 16" x 18" travel
Linear way construction
1890 in/min (48M / min) rapid traverse
12,000 rpm, BIG PLUS CAT 40 spindle
16 tools carousel type ATC
Fanuc Oi-MD control
Small footprint

Specifications:
Work Capacity:
Travel X,Y,Z: 24" x 16" x 18.1" (610mm x 356mm x 460mm)
Spindle Nose to Table: 7.9 - 23.6" (200mm - 600mm)
Spindle Center to Column: 17" (432mm)

Work Table:
Table Area: 27.5" x 16.5" (700mm x 420mm)

Spindle:
Spindle Taper: CAT 40
Spindle Max. Speed: 12,000 rpm
Driving Type: Belt Drive
Motor (30m/cont.): 7.3/10(5.5/7.5 kW)

Automatic Tool Changer (ATC):
Magazine Type: Carousel
Magazine Capacity: 16
Tool Selection Type: Set Tool Number
Max. Tool Diameter: 3.9" (120mm)
W/O Adj. Tool, Max. Dia: 5.9" (150mm)
Max Tool Length: 9.8" (250mm)
Max Tool Weight: 15.4lbs (7 Kg)
Air Blast at Tool Change: Standard

Motion:
Cutting Feed Rate: 0.04-393.7 ipm (1-10,000 mm/m)
Rapid Traverse: X/Y/Z - 1,890 ipm (48,000 mm/m)

Accuracy:
Positioning Accuracy: 0.00016/0.004 inch
Repeatability Accuracy: 0.00012/0.003 inch(mm)

CNC Control Features:
Controller: Fanuc
Control Model: Oi-MD
Programming Assist: Manual Guide
4th Axis Support: Standard
Screen Size: 8.4 LCD

Coolant System:
Flood Coolant Nozzles: 2
Coolant Tank Capacity: 42 Gal. (160 L)
Chip Pan: Standard

Power Requirement:
Electrical: 220V/3 Phase/ 20 KVA/60 Hz
Air: 6 CFM @ 88 psi

Machine Measurements:
Floor Space: 72.8" x 85" x 91.5"
Floor Space (w/ side mount) 78.2" x 85" x 91.5"
Door Opening: 25" (635M)
Weight: 7,260 lbs. (3,300)

Standard Equipment:
Fanuc Oi-MD control & drives with ; USB port, 512K Memory, Embedded Ethernet, RS-232C interface, 4 additional M codes, M30 Auto Power OFF
Full metal enclosure w/ 2 large side doors
Coolant system w/ enlarged coolant tank
Coolant Gun
Spindle Chiller
Auto lubrication system
Rigid Tapping
Air Gun
Removable electronic hand wheel (MPG)
Door Interlock
Chip pan
Air Accumulator
Heat Exchanger for Electric Cabinet
Fluorescent work light

Optional Accessories: (Please call for pricing and additional information)
4th Axis kit prepped (electrics, cables unit)
4th Axis with rotary table (complete with drives, motor)
Flat Type Chip Conveyor
15,000, 20,000 rpm with Big Plus Spindle
Oil skimmer
Coolant Through Spindle (CTS) prepped (rotary joint, hoses, cylinder electrics)
CTS 20 bar (300 psi) pump with tank
Tool Probe (Renishaw TS27R)
Tool Setter (Renishaw OMP40)

PAYMENT: Banker's check or wire transfer are preferred when dealing with transactions that exceed $1000. Any purchase of over $1000 will come with an extra 3% charge when paying through Paypal or with a Credit/Debit Card. All major credit cards are accepted.

WARRANTY: Sharp Industries warrants to the original purchaser, other than a purchaser for resale, (the “Purchaser”) that Sharp Industries machine tools shall be free of defects in materials and workmanship. For a period of one (1) year from completion of installation, Sharp Industries will, at its sole and exclusive discretion, either replace or repair any machine or part thereof defective in workmanship or material, at no charge to the Purchaser.

All warranty repairs must either be performed by Sharp Industries or MachineStation. To obtain warranty service, Purchaser must contact MachineStation. Purchaser must provide verification of the date of delivery/installation when requesting warranty service (dated installation report). Ground freight charges (UPS regular or common carrier truck) for all warranty replacement parts are paid by Sharp Industries. If machine is not operational, Sharp Industries will pay next-day air shipment charges for necessary parts weighing 100 lbs. or less. Materials or parts alleged to be defective shall be returned to Sharp Industries, at Sharp Industries’ request, transportation charges prepaid. After the warranty repair or replacement of a defective part, Sharp Industries’ warranty for such part shall continue for ninety (90) days or for the remainder of the original Limited Warranty, whichever is longer.

MACHINE USE AND SAFETY: Buyer acknowledges that the Seller has no knowledge or control over the application of these goods by the Buyer. It is the Buyer’s (user’s), responsibility to provide proper safety devices, equipment and instructions for any particular use, and to take all necessary steps to confirm to all Federal, State or Local Government Safety Standards and including OSHA.

BUYER IS RESPONSIBLE FOR SCHEDULING TRANSPORTATION OF THIS MACHINE, AS WELL AS ALL COST TO MOVE IT. IF YOU NEED HELP WITH SCHEDULING, PLEASE CONTACT US AND WE WILL ASSIST YOU. WE SHIP GLOBALLY.

This machine is listed for sale by MachineStation located in Chino, California