NEW SCOTCHMAN 85 TON IRONWORKER
MODEL: DO 8514-20M
*MADE IN THE USA*
STANDARD FEATURES:
Dual operator allows for two operators to work at the same time at full capacity
85-ton punch station (1-1/16" in 1")
Keyed punch ram for safety
14" throat depth
Punch gauging table with fence and scale
Die holder complete with 2" die insert
Punch nut with wrench & stripper
Adjustable swing-away stripper
One round punch & die: max. diameter 1-1/4"
Punch jog control
Two adjustable electric stroke controls with scale
Two electric remote foot pedals
Two 2-stage hydraulic pumps
Two valves
6" x 6" x 1/2" slug-less angle shear
Built-in rectangle notcher: 2" x 4" x 1/2" can be converted to 3" x 3" V-notcher,
50-ton punch station, and 6" open end brake
20" flat bar shear
Shear table with miter fence
Rod shear: 1/2", 3/4", 1", 1-1/2" round and 1-1/2" square
Slug receptacles
Electrical box supplied with emergency palm button and lock-out tag-out accommodations
230/460 volt/3-ph electrics (must specify voltage)
All guards necessary to comply with ANSI B 11-5 standards
Forklift accommodations
3 year warranty on parts
CAPACITIES AND SPECIFICATIONS:
RATED ON A36 MILD STEEL/65,000 PSI TENSILE
Punching capacity .................................. 85 ton (77 mt)
.................................. 1-1/16" in 1" (27 mm in 25 mm)
Special tooling .................................... 4" max. dia. (200 mm max. dia.)
Throat depth ....................................... 14" (350 mm)
Flat bar shear ................................. 20" length (500 mm)
................................. 1" x 16" (25 x 400 mm)
................................. 3/4" x 20" (19 x 500 mm)
Angle shear
90 degrees ........................................ 6" x 6" x 1/2" (150 x 150 x 13 mm)
45 degrees (w/Bar shear) .......................... 4" x 4" x 1/2" (100 x 100 x 13 mm)
Brake 12" .......................................... 85 ton (77 mt)
Brake 24" .......................................... 85 ton (77 mt)
Open end brake ..................................... 5" x 5/8" (125 x 16 mm)
Pipe notcher ....................................... 3/4", 1" (19 mm, 25 mm)
Schedule 40 ....................................... 1-1/4" (32 mm)
....................................... 1-1/2", 2" (38 mm, 50 mm)
90 degree V-notcher (punch station) ................ 6" x 6" x 5/16" (150 x 150 x 8 mm)
Rectangle notcher .................................. 2" x 4" x 1/2" (50 x 100 x 13 mm)
90 degree V-notcher (notcher station) ............. 3" x 3" x 1/2" (75 x 75 x 12 mm)
Punch attachment for notcher station .............. 50 ton, 1-1/4" in 1/2" (32 mm in 12 mm)
Throat depth w/punch attachment ................... 4-7/16"
Channel shear ...................................... 2" to 6" (50 mm to 150 mm)
Strut shear ........................................ samples required
Rod shear
Round rod (max.) .................................. 1/2", 3/4", 1", 1-1/2" (13 mm, 19 mm, 25 mm, 38 mm)
Square rod (max.) ................................. 1-1/2" (38 mm)
Square tube shear .................................. 1/2" to 2", 12 gauge (12 mm to 50 mm, 2.75 mm)
Picket tool ........................................ 1/2", 3/4", 1" (13 mm, 19 mm, 25 mm)
........................................ 16 gauge (1.6 mm)
Offset die holder .................................. Max. 40 ton (36 mt)
Strokes per minute
In light material ................................. 48 spm (1/4" stroke) [punch station]
In heavy material ................................. 20 spm (3/4" stroke) [punch station]
Hydraulics ......................................... 3,350/3,800 psi (231/262 bar)
Motor
Standard .......................................... 10 hp 3 ph (7.46 kW) 230/460/208/380/575v
Optional .......................................... 10 hp 1 ph (7.46 kW) 230v
Dimensions ......................................... 70" L x 30" W x 77" H
......................................... (178 cm x 76 cm x 196 cm)
Shipping weight .................................... 5,504 lbs. (2,496 kg)
OPTIONAL STANDARD TOOLING (CALL FOR PRICING):
12" & 24" brake
Open end brake
Pipe notcher
90 degree V-notcher
Tube shear
Picket tool
6" x 6" die holder
Offset die holder
Urethane stripper
Open end brake for notcher end
Strut shear
Channel shear blades
Optional punch for notcher end
Punch slug receptacle
Punch table extension
48" back gauge
Brake length gauge with scale (12" & 24" brakes)
Brake table with scale & squaring arm (12" & 24" brake)
Multi-loc punch gauging table (36" & 85" extensions)
24" x 5' conveyor with angle iron support
*We will meet or beat virtually any price on the web. We also offer special financing deals with integrated discounts for qualified customers.
FOR MORE INFORMATION: Call Terry at 973-497-7612