CALL 386-304-3720 FOR AVAILABILITY

AVAILABLE MODEL: 2240B / 2260B / 2280B / 22100B / 22120B / 22160B

FEATURES:
This model has 4.5” spindle bore, D1-11 Camlock spindle nose, 16” wide bed, 15 HP motor offers great capacity for large work piece. The low speed goes down to 10 rpm offering enough torque for heavy cutting.
D1-11 camlock spindle
4.5" spindle bore
15 HP motor
12 speeds (10-1,000 rpm)
Quick change gearbox
One piece Meehanite cast bed
Direct selection for inch / metric threads
Double chucks available as option
4.5” spindle bore , largest spindle in this size lathes. More choices for different diameter of materials to be machined.
All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining
High precision pair of matched angular contact bearings supporting the front end of head stock, and rolling bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.
Wide range of feeds and threads. Selection done by “pull and lock” handles to avoid slipping in engagement of gears.
Gears in gearboxes are supported at 3 points with high precision bearings to ensure long lasting feeds and threading operations
Feed gears are mounted on spline shafts for adequate feed power
One piece casting bed instead of sheet metal connected legs ensure dampening of vibration and permanent straightness of the bed ways.
The carriage is coated with TURCITE for better oil retention and for minimum bedwear, longer life.
The removable gap increases the swing by an extra 9” to accommodate larger work pieces that are short in length
Jog button is equipped at headstock for easy engagement of gears before cutting
5” spindle bore, largest spindle in this size lathes. More choices for different diameter of materials to be machined.
All headstock gears are hardened and ground made from Chrome-Moly material gives long lasting power and accuracy in machining
High precision pair of matched tapered roller bearings supporting the front end of head stock, and ball bearing for the rear end support. This arrangement allows high accuracy of the spindle even under heavy cutting conditions.

STANDARD EQUIPMENT:
4-jaw 16" chuck, face plate (20")
Steady rest (4" – 11.5"), 4 ways tool post
Coolant system, halogen light
4-way carriage stop
Splash guard & 16" chuck guard
Tailstock, follow rest, tool kit
Rapid transverse on longitudinal (on 100" centers distance and up only)
Wired 220V or 440V (Specify)

SPECIFICATIONS: 2240B / 2260B - Contact us for more model specifications
CAPACITY
Swing Over Bed: 22"
Swing Over Cross Slide: 13.2"
Swing Over Gap: 31"
Distance Between Centers: 40" (2240B) / 60" (2260B)

HEAD STOCK
Spindle Speed: 10-1,000 rpm
No. of Spindle Speeds: 12
Spindle nose: D1-11 camlock
Spindle bore: 4.5 in. (114.3 mm)

THREADS & FEEDS
Inch Threads, Number: 2-56 tpi, 44
Metric Threads, Number: 0.5-14 mm, 24
Modular Threads, Number: 0.019-0.55 in., 24 (0.5-14 mm, 24)
Diametral Pitch Threads, Number: 0.157-2.20 in., 36 (4-56 mm, 36)
Longitudinal Feeds: 0.0022-0.032 in., 17 (2240B) / 0.0022-0.032 in., 18 (2260B)
Cross Feeds: 0.00026-0.035 in., 17
Leadscrew Pitch, Diameter: 4 tpi, 1.5 in.

CARRIAGE
Cros slide travel: 14.75 in. (374.6 mm)
Compound Travel: 8 in. (203.2 mm)
Compound Width: 6 in. (152.4 mm)

BED
Bed length: n/a
Bed width: 15.75 in. (400.05 mm)

TAILSTOCK
Quill Diameter: 3 in. (76.2 mm)
Quill Travel: 6.5 in. (165.1 mm)
Quill Center Taper: MT #5

GENERAL
Spindle Motor: 15 HP (11.18 Kw)
Voltage: 220V/440V
Phase: 3 phase
Power Consumption (220V): 16KVA/45 amps
Power Consumption (440V): 16KVA/22.5 amps
Approximate Weight: 5,280 lbs. (2240B) /5,610 lbs. (2260B)
Dimensions: 7.08' x 3.41' x 4.16' (2240B) / 9.5' x 3.41' x 4.16' (2260B)

OPTIONAL ITEMS:
3-jaw chuck, different sizes
4-jaw chuck, different sizes
Taper attachment
Chuck guard w/ limit switch
Tool guard w/ limit switch,at front of compound
Lead screw wrapped around screw (accordion style)
Lead screw guard, cover entire front of machine bed
Safety cover at the end of spindle
UL or CSA electrical components, UL spindle motor, CSA pump motor
Steady rest
Quick change tool holder (aloris) (7 pcs holder) 1.25" tool
Live center – (dual bearing) MT #5
5C lever collet closer
5C collet set (1/8 to 1/16" x 1/16" ) (16 pcs)
Micrometer carriage stop
Roller jaws set (3 pc)

Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida