Purchased New in 1990 / Never Installed

Most components still in original packaging

Main cylinder: Forged steel
Tie rods: 4-forged steel
Press Capacity: 3160-4000 MT
Operating pressure max: 250 bar
Billet diameter: 240mm-350mm
Max billet length: 1100mm

Main Cylinder: 3160 MT
Side cyl: 420 MT
Return main cyl: 180 MT
Direct extrusion: 3580 MT
Indirect Extrusion: 4000 MT
Piercing: 800 MT
Return piercing: 600 MT
Container closing: 420 MT
Container opening: 180 MT
Main Shear: 120 MT

Stroke

Main and side cylinders: 3000 mm
Container: 2000 mm
Piercer: 1200 mm
Main shear: 800 mm

Max Operating Speeds

Main ram fast advance: 275 mm/sec
Main ram return: 353 mm/sec
Extrusion at 3160 MT: 25.5 sec
Extrusion at 3580 MT: 22.5/sec
Extrusion at 4000 MT: 20mm/sec
Piercer advance: 100mm/sec
Container closing: 144mm/sec
Container opening: 336mm/sec

Hydraulic System Rexroth

Main pumps: 5
3 pumps at variable: delivery 3x 460l/min
2 at fixed: delivery 2x 460 l/min
Main pump motors=5 5x250 kw at 1000 RPM
Conditioning pumps=1 delivery 1100 l/min
Conditioning motor=1 1x37 kw at 1500 RPM

Auxiliary pumps=4
3 at variabledelivery 2x140 l/min
delivery 1x40 l/min
1 at fixeddelivery 1x23 l/min

Auxiliary pump motors2x30 kw at 1450 RPM
1x7.5 kw at 1450 RPM
1x11 kw at 1450 RPM

Piercer cooling pump1x50 l/min
Piercer cooling motor1x7.5kw at 1500 RPM
Tank capacity (piercer cooling-water)1500 dm3
Tank capacity (oil)1800 dm3

Billet cut-to-length line

Complete with sawing unit, the loading and unloading equipment, and a billet

stacking system.

Gas fired billet heater

Max productivity: 7000 kg/hr
Working temp: 300 to 480 deg C
Max consumption: approx 160 Nm3/h
Installed electric power: 120 Kw

Billet scalper

The billet scalper comes complete with the billet handling equipment.
Max billet diameter: 400 mm
Thickness of scalping chips: 2-15mm
Installed electric power: 200 Kw

Induction billet heater
Billet dia: 240-350 mm
Billet length: 400-1200 mm
Max productivity: 7000 kg/h
Installed electric power: 700 Kw

Pre heating die oven

Max loading weight: 3000 kg

Run out table and walking beam cooling bed

Length: 45 meters
Width: 5 meters
Installed electric power: 80 kw

Cross transfer equipment for heavy rod and pipe

Water quench spray
Cooling capacity: 2,000,000 Kcal/m2/h
Water delivery max: 3000 liters/min
Installed electric power: 15 kw

Hot saw
Saw blade dia: 650 mm
Electric power: 15 Kw
Cut positioning max: 15 m
Min: 4 m

Puller
Pulling force: 50 to 1000 Kg
Pulling speed: 0-20 m/min
Installed: 40 Kw

150 ton hydraulic stretcher
jaw opening: 300 mm
jaw width: 300 mm
max stretching length: 44 meters
min stretching length: 1 meter
stretching speed: 25mm/sec
de-twisting torque: 5000 kg
installed electric power: 160 Kw


Saw
Max dia: 180 mm
Max length of cut: 15 m
Installed electric power: 47 Kw
Includes after saw roller table, profile stopping arms, and after saw

translators

Electric ageing furnace

Length: 16,000 mm
Width: 2600 mm
Height: 1500 mm

Max load weight: 20,000 kg
Working temp: 120-250 deg C
Installed electric power: 450 Kw


Solution heat treatment oven and water basin

Notes:
Oil-hydraulic (Rexroth), and electric (Siemens) equipment for the entire line.
One set of spare parts for the entire plant, for a two-year production period

(250 working days per year and 20 working hrs per day.

Piping and electrical wiring on machine board and up to the electrical panel.

ALL SYSTEMS HEREWITH DETAILED ON THIS OFFER ARE SOLD ON AN AS IS, WHERE IS

BASIS. ALL SPECIFICATIONS NOTED ARE AS DETAILED BY OWNER OF SYSTEM AND SHOULD

BE VERIFIED BY BUYER, UNLESS OTHERWISE NOTED ON THE OFFER. THERE IS NO

WARRANTY OR GUARANTEED IMPLIED OR CONTRACTED, UNLESS OTHERWISE NOTED ON THE

OFFER.

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey