DANIELI WEAN UNITED HOT DIP GALVANIZING AND COIL COATING LINE |
|
Stock Code: |
112415 |
Price: | $RFQ |
Subcategory: | Coating Lines |
Manufacturer: |
Danieli |
Condition: | Used |
DANIELI WEAN UNITED CONTINUOUS GALVANIZING & COIL COATING LINE
Production Start up- February, 2002
LINE SPECIFICATIONS
Entry Material:
Cold Rolled Steel
Full Hard: 0.4mm to 3.0mm
MATERIAL PRODUCED
Thickness, Width and Speed:
Galvanized Coils- 3000mm2
Thickness: 0.3mm to 3mm
Strip Width: 600mm to 1500mm
Speed: 150m/Min
Pre-Painted Coils from Cold Rolled Steel Coil: 2295mm2
Thickness: 0.3mm to 1.5mm
Strip Width: 600mm to 1500mm
Speed: 100m/Min
PRODUCTION CAPACITY:
812 Tons Daily
50% Galvanized Coils and 50% of Pre-Painted Coils.
Annual Nominal Production:
200,000 Tons Galvanized
150,000 Tons Galvanized and Pre-Painted
Zinc Coating:40 G/M2 to 200 G/M2 per Side = 80 G/M2 to 400 G/M2
Zinc Pot Composition:Aluminum: 0.18 to 0.20%; Lead: 0.05% (Disappears)
Production process is fully automated, controlled by operators from four
control desks.
Modern and sophisticated video systems, measurement and control.
ENTRY
Coil Storage Stands and Transfer System
(2) Cars, Snubber Rolls, Coil Opening Peelers, Hydraulic Operation
(2) Mandrel Type Uncoilers
(2) 5-Roll Straighteners
(2) FIFE Centering Systems
(2) X-Ray Thickness Gauge System
Crop Shear, Dump Station
NEWCOR Splicer Welder
NEWCOR Edge Welders
BRIDLE ROLLS
HORIZONTAL ACCUMULATOR
GALVANIZING
DEGREASING SECTION
Pressurized Water Caustic Prewash and Brushes
HEAT TREATMENT
Continuous Annealing Furnace, 24 Direct Burners
ZINC POT
COOLING
Fans and De-Mineralized Water Tank
45 Meter Cooling Tower
4 HI TEMPER MILL WITH TENSION LEVELING
TEMPER MILL
Hydraulic Bottom Screw Adjustment
BRIDLE ROLLS
TENSION LEVELING
6 Cassets
BRIDLE ROLLS, DIRECTIONAL
IF NO PAINT TO BE APPLIED
Trivalent Chromium Protects Against Formation of Zinc Oxide
IF PAINT IS TO BE APPLIED
Chemical Treatment "Bonderized" to Improve Adhesive Properties of The Paint
COIL COATING
Primer Coat
GLOBUS "S" Type Double Coil Coater, 2001A
DRYING OVEN
COIL COATING
Finishing Coat, Color, Globus "T" Type Coil Coater
Finishing Coat, for quick color change, One or Both Sides
GLOBUS "S" Type Coil Coater
DRYING OVEN
Solvents Are Evaporated
VERTICAL ACCULULATOR
ELECTROSTATIC OILER
RECOILER, MANDREL TYPE
Coil Car
BANDING STATION
EXIT COIL STANDS
This machine is listed for sale by National Machinery Exchange Inc
located in Newark, New Jersey