UTUBE NUMBER: 1166
MANUFACTURER: Yoder Manufacturing Co.
MODEL NUMBER: W15 Forming - W15 Reducing
SERIAL NUMBER: Y1352-62

SPECIFICATIONS:
Type: Refrigeration Mill, Carbon Steel
Hand of Operation: Left to Right

This machine was used to manufacture Refrigeration Tubes that must be
reduced to increase length and maintain wall thickness.

The tube is welded at .480" and reduced to smaller sizes

Welding Speed: 125 FPM Max., Gear In Speed, No Load
Reducing Speed: 275 FPM @ 3/16" (4.7mm)
200 FPM @ 1/4" (6.3mm)
150 FPM @ 5/16" (7.9mm)

ENTRY EQUIPMENT:
2,000 Lb. (1 Ton) Gantry Crane
2,500 Lb. (1.2 Ton) Double Uncoiler
Overhead Looper 2 Strand, approximately 300 Feet Storage
Shear End Welder
Pinch Roll Pull Out Stand, 10 H.P.

FORMING MILL:
Entry Guide Unit
3- Driven Breakdown Stands
2- Driven Fin Passes
4- Idle Side Roll Units
1- Seam Guide Unit
1- 18,000 Amp. D.C. Welder Rotary Resistance
1- Scarfing Unit
1- Coolant Section
1- 20 H.P. D.C. Motor

REDUCING (Sizing) MILL:
9- Driven Reducing Stands
9- Idle Side Roll Units
1- Straightener Stand
9- 7.5 H.P. D.C. Motors

D.C. DRIVE SYSTEM:
1- Walco Solid State D.C. Drive System, with Cutler Hammer Controls
Voltage 380/3/50

Tooling to Produce the Following Sizes:
3/16" (4.7mm) - 1/4" (6.3mm) - 5/16" (7.9mm)
All Produced From 1/2" Welded Tube

NOTE: Tooling is believed to be complete, but suggest customer
inspection to confirm.

Overall Dimensions: Multiple Pieces, 3 Truckloads
Approximate Weight: 65,000 Lbs.

LOCATION: Universal Warehouse, Perrysburg, Ohio

This machine is listed for sale by Universal Tube & Rollform located in Perrysburg, Ohio