The Dake Super Technics 350CE model manual cold saw uses up to 14" circular cold saw blades, has a dual-speed 3.5 hp motor, and mounts on an included pedestal that houses a built-in coolant tank and pump. The blade rotates at either 22 or 44 rpm, selected by a switch. The saw head pivots up and down to cut, and rotates 45 degrees to the right and left of center for miter cuts, and 90 degrees to the right to cut slots. The work bed includes a cam-operated vise with gib adjustment and a cushioned clamping arm that helps prevent burrs in the final cutting stroke. The saw drive has an oversized steel spindle and a tapered bronze roller bearing gear assembly for heavy-duty use. The hardened and ground spindle shaft has ball bearing support for reliability. The clutch device can be adjusted for maintenance. The saw is wired for three-phase, 220 volt AC operation, and has protection for low voltage and thermal overload.

 

Head rotates 45° right and left of center for mitering.

Dependable oversized spindle and gear assembly with steel spindle and bronze gear.

Bronze gear with tapered roller bearing support.

Reliable mechanical coolant pump with flow control adjustment.

Adjustable hinged pivot.

Additional ball bearing support of hardened and ground spindle shaft to prevent failure.

 

STANDARD EQUIPMENT   

Blade

Pedestal base

Tool kit

Gallon of coolant

Adjustable positive stop

 

Maximum blade diameter ............................ 14

Motor horsepower .................................. 3.5

Voltage ........................................... 220/440

Phase ............................................. 3

Speeds ............................................ 22/44

Weight ............................................ 650

Solid round 90° capacity (inches) ................. 3-3/8

Solid round 45° capacity (inches) ................. 3

Tube 90° capacity (inches) ........................ 4-3/4

Tube 45° capacity (inches) ........................ 4

Square 90° capacity (inches) ...................... 4-1/8

Square 45° capacity (inches) ...................... 3-3/8

Rectangle 90° capacity (inches) ................... 6-1/4 x 3-1/2  

Rectangle 45° capacity (inches) ................... 3-3/8 x 2-3/4

 

A Work height ..................................... 40"

B Overall front to back head up ................... 43"

C Height .......................................... 75"

D Floor space left to right ....................... 24-3/4"

E Floor space front to back ....................... 23"

 

*We will meet or beat virtually any price on the web. We also offer special financing deals with integrated discounts for qualified customers.