TENNSMITH LM410 4ft x 10 ga. Low-Profile Mechanical Shear |
|
Stock Code: |
LM410 |
Price: | $RFQ |
Subcategory: | Shearing Machines |
Manufacturer: |
Tennsmith |
Model: |
LM410 |
Condition: | New |
CALL 386-304-3720 FOR AVAILABILITY
FEATURES:
*MADE IN USA
*TENNSMITH'S LM Series Mechanical Shears utilize a low maintenance design, coupled with an array of standard features for an attractive combination of high value and solid performance. The LM410 incorporates the unique 2x-F back gauge system. This allows the operator to move the backstop from 0 - 24 inches in approximately 2 seconds with only two rotations of the handle. The LM610 and LM810 incorporate the same 2x-F system, but with the added capacity of 30-inch travel. An optional digital readout is available for this system.
*The LM Series shears are standard with four-edge, high carbon, high chrome top and bottom blades, independent, self-leveling hold down feet with neoprene inserts, single, continuous and jog stroke cycles, motor reverse switch, precision-machined table with hand well, dual inch/metric inlaid bed scales and non-metallic gibs.
-LM410 capacities are 10-gauge mild steel, 16-gauge stainless up to 52-1/2" in cutting length.
-LM610 capacities are 10-gauge mild steel, 14-gauge stainless up to 73" in cutting length.
-LM810 capacities are 10-gauge mild steel, 14-gauge stainless up to 98" in cutting length.
*To enhance productivity, optional equipment available for the machines.
*The LM Series also has available an air operated sheet support system. This system is available in two styles for the LM412:
-System-R drops the supported material to the rear of the machine
-System-F returns the supported material to the front of the machine via a front return chute
-The Models LM610 and LM810 are available only with System-R
*Please call 386-304-3720 for details
SPECIFICATIONS:
Maximum shearing capacity, Mild Steel*: 10 gauge / 3.5mm
Maximum shearing capacity, Stainless Steel**: 14 gauge / 2.0mm
Maximum cutting length: 52-1/4" (4') 1,334mm
Back gauge range: 24" / 609mm
Strokes per minute, full length: 35
Number of hold down feet: 14
Motor - 230/460V, 3-Phase, 60Hz: 7.5 HP
Voltage (please specify): 230v/3/60 or 460v/3/60
Dimensions, LxWxH: 72" x 27" x 56"
Floor space, gauges in position: 72" x 72" x 56"
Shipping Weight: 3,400 lbs.
*Mild Steel Rated Materials at 80,000 Tensile / 44,000 Yield
** Stainless Steel Rated Materials at 90,000 Tensile / 55,000 Yield
OPTIONAL ITEMS:
*Wired for CSA Canadian Electrical Standard
*83800: Squaring Arm Five Foot with Dual Inlaid Inch/Metric Scale
*83805: Squaring Arm Ten Foot with dual Inlaid Inch/Metric Scale
*83815: Additional Flip-up Stops for Squaring Arm (each)
*83820: Front Support Arms Pair
*83825: T-Slotted Table with Two Front Support Arms with Inlaid Inch/Metric Scales
*83830: Additional Flip-up Stops for T-Slotted Support Arms and Table (each)
*83835: Power Back-gauge 30-Inch Travel
*83840: Protractor Attachment
*83885: Work Shadow Light LM Series
*83895: Digital Readout for 2x Back-gauge System
*83890: Stroke Counter (Electro-Mechanical)
*83935: LM410 High Carbon High Chrome 4 Edge per set
*All LM Series Shears are available in a reduced price "Performance Package" configuration. The Performance Package includes:
-5 foot squaring arm
-A pair of front support arms
-Air operated sheet support system
*Performance "R" system is for rear return
*Performance "F" system is for front return
*Increased Cutting Speeds (Please Call)
*Please Contact Sierra Victor Industries at 386-304-3720 for a complete listing of optional equipment
OPTIONAL MODELS:
LM410: 4 foot x 10 gauge shear (BASIC MODEL)
LM410-R: Low-Profile Mechanical Shear with Performance Package-R (Rear Return Sheet Support System)
LM410-F: Low-Profile Mechanical Shear with Performance Package-F (Front Return Sheet Support System)
Specifications are subject to change without notice.
NOTE: Data is provided by the manufacturer.
WARRANTY: 3 YEAR – Limited
This machine is listed for sale by Sierra Victor Industries
located in Port Orange, Florida