Elmaksan 45mm Tube Welding Line #2, 1996
Line Direction - Right to left
Max Tube Diameter - 13mm to 45mm (0.5" to 1.77")
Profile range - 10mm x 20mm to 30mm x 40mm (0.394" x 0.787" to 1.18" x 1.57")
Max Wall Thickness - 0.8mm to 2.5mm (0.315" to .098")
Average Speed- 100 m/min (will advise speed range)
Tooling - Numerous Sets of Tooling available, round, square, rectangle
Status - Installed in Turkey
Material - Carbon Steel

Line Components:

Jib Crane

Double End Payoff Reel
Air Disc Brake
Hydraulic Expansion
ID Range - 15"-20"

Coil End Joiner, manual

Horizontal Accumulator

Elmaksan Tube Mill -

Forming Section, Elmaksan
Strip Entry Side Guide and 3 Roll Straightener
6 Vertical Forming Stands
Shaft Diameter 50mm
Roll Space 200mm
Horizontal Centers 420mm
Rafted, Stands are mounted on removal plates for quick change capability
(There is no second set of stands available)
Universal Drive
Single Point Adjustment
5 Side Roll Stands
Motor - 100 HP DC, 460V, 2300 RPM

Welding Section
Seam Guide
3 Roll Weld Box
Thermatool 250 KW Hi Frequency Welder, Oscillator
CT 9303375; 400 Khz; 380 Volt; 449Kva; 50 Hz
2 position OD Scarfing Stand

Cooling Section, 4 meter length

Sizing Section, Elmaksan
4 Vertical Sizing Stand
Rafted, Stands are mounted on removal plates for quick change capability
(There is no second set of stands available)
Universal Drive
Single Point Adjustment
3 Side Roll Stands
Turkshead
Motor - 150 HP DC, 460 Volt RPM, 2300 RPM

Cutoff
Thermatool Alpha ASR 2005-41-35 Double Cut Cutoff
Machine # CA9603921
Max Tube OD - 50.8mm (2.0")
Max Wall - 0.7mm to 2.5mm (0.028" to .098")
Speed Capacity - 150 meters/min (500 ft/min)
Hydraulically Operated Accelerator
Unico Length Control

Runout 12 Meter
Elevator Table
Bundling Station

Operator Pulpits for Thermatool Welder and Thermatool Alpha Double Cut Cutoff
Mentor II DC Motor Drives

Electrics, Hydraulic Power Systems, Controls & Manuals/Drawings to operate

mill

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey