WEAN UNITED 4-HIGH TEMPER MILL FOR COLD ROLLED ANNEALED GALVANIZED MATERIAL |
|
Stock Code: |
108122 |
Price: | $RFQ |
Subcategory: | 4 - Hi Rolling Mills |
Manufacturer: |
United |
Condition: | Used |
Technical specifications:
Strip data
Material....................... Cold rolled and annealed, galvanized
Strip dimensions
Strip width.................... max 1280 mm
min 525 mm
Thickness...................... max 3,5 mm
min 0,4 mm
Cross section.................. max
Coil dimensions
Outside diameter............... max 2100 mm
min 900 mm
Inside diameter................ nom 610 mm
Coil weight.... entry side..... 32 Tn
exit side...... 32 Tn
Mill data
Mill design..................... 4 mill stand
Roll dimensions
Work rolls
Diameter (No. 1 roll set)..... max 660 mm
min 583 mm
Barrel length................. 1422 mm
Bearings...................... roller bearings
Back up rolls
Diameter...................... max 1420 mm
min 1320 mm
Barrel length................. 1422 mm
Bearings...................... roller bearings
Roll separating force........... max Tn
Roll bending force.............. approx kN per neck
Rolls drive..................... top and bottom back up rolls drive
Rolling speed................... max 1524 mpm
Acceleration.................... 2,5 m/s2
Emergency stop.................. 5 m/s2
Elongation...................... 3%
Pay-off reel
Type of design.................. 4 segment reel mandrel
Nom mandrel diameter............ 610 mm
Tension reel
Type of design.................. 4 segment reel mandrel
Nom mandrel diameter............ 610 mm
Electrical Power
All motors used for strip driving are DC motors
Entry Motors(CV) Trans.(KVA)
Conveyor n 1 1 x 15
Conveyor n 2 1 x 20
Pay of reel 1 x 400 + 2 x 15 + 2 x 1,5 1.582
Process
Skin Pass Mill 2 x 800 + 3 x 5 + 2 x 1,5 1.807
Exit
Tension reel 1 x 20002.260
Exit conveyor 1 x 30
Auxiliary systems
Five hydraulic units 12 x 75 + 2 x 50
Lubrication station
Morgoil system 1 x 15 + 2 x 10
Morgoil lubrification system 1 x 20
Two exhaust fans for basements 2 x 30
Fog exhaust system (102.000 m3/h) 1 x 100
Specific Consumptions
Batch annealed coil............. 1.03 Tn
Cooling water................... 0,2 m3
Electrical Energy............... 10.865 Kwh max
Desmineralized water............ 0,007 m3
Compresed air................... 13,692 Nm3
Consumptions per skin passed ton
This machine is listed for sale by National Machinery Exchange Inc
located in Newark, New Jersey