25" (635mm) WATERBURY FARREL ZR 23-25 SENDZIMIR MILL w/AGC |
|
Stock Code: |
112084 |
Price: | $RFQ |
Subcategory: | Sendzimir Rolling Mills |
Manufacturer: |
Waterbury-Farrel-Foundry-Machine-Usa |
Model: |
ZR 23SC-25 |
Condition: | Used |
SPECIFICATIONS:
MANUFACTURER: WATERBURY FARREL FOUNDRY & MACHINE (USA)
TYPE: 20-HI PRECISION COLD REVERSING ROLLING MILL
WITH AGC (AUTOMATIC GAUGE CONTROL)
MODEL No.: ZR 23SC-25
MAXIMUM INCOMING THICKNESS: 0.140" (3.56mm)
MINIMUM FINISH THICKNESS: 0.0025" (0.0635mm)
MAXIMUM COIL WEIGHT: 15,000 LBS. (6,800 KG)
SPEED RANGE: 0-1000 FPM (O-305m/Min.)
MAXIMUM TENSION: 20,000 LBS. (9,071 KG)
AUTOMATIC GAUGE CONTROL SYSTEM: NEW 2001
TYPE: MASS FLOW
THICKNESS GAUGES: VOLLMER 0199/P90/9189
READOUTS: 1 x VMF 3/90
1 x VMF 2000
NOMINAL WORK ROLL DIAMETER: 2.42" (61.46MM)
BACKING BEARING DIAMETER: 8.858" (225mm)
OIL MIST LUBRICATION SYSTEM ON BILLY ROLLS AND WIPERS
ROLL WIPERS ON ENTRY AND EXIT SIDES
PRESSURE BOARD: UP TO 1000 psi
HCS POSITIONING SYSTEM
NEW (PARTIAL) UPGRADE TO SCR D.C. ELECTRICAL DRIVE SYSTEM INSTALLED 2008
THE MILL CONSISTS OF:
PAYOFF:
TYPE: PYRAMID EXPANDING MANDREL
YEAR OF MANUFACTURER: 2001
MANDREL I.D. RANGE: 19 1/2"- 20" (495mm - 508mm)
MANDREL WIDTH: 26" (660mm)
TYPE EXPANSION: HYDRAULIC
SLIDING BASE
MAXIMUM COIL WEIGHT: 15,000 LBS. (6800 KG)
COIL SNUBBER HOLDDOWN: HYDRAULIC
PAPER UNWINDER
6 COIL ENTRY WAITING STATION
COIL CAR
DRIVE MOTOR: 75 HP,400/1600 RPM, 600 VOLTS,
120 AMPS, G.E. D.C. VARIABLE SPEED
GEARBOX: HORSBURGH & SCOTT 400/1600 RPM,
RATIO 1.2 TO 1
LEFT AND RIGHT WINDERS:
REVERSE PYRAMID WINDERS
MANDREL DIAMETER: 19 1/2"- 20" (495mm - 508mm)
MANDREL FACE: 30" (762mm)
USES SOLID BLOCK CORES
COIL PUSH-OFF: HYDRAULIC
COIL CAR
RIGHT COIL WINDER REBUILT IN 2010
DRIVE MOTOR: 2 x 250 HP, 240 VOLT D.C., 500/1440 RPM
RELIANCE VARIABLE SPEED W/SCR CONTROLS
UPGRADED IN 2008
MAIN MILL:
ROLL WIPERS BOTH SIDES: 400 psi
PRESSURE BOARD: 1000 psi
OIL MIST COOLANT SYSTEM
VOLLMER GAUGES BOTH SIDES
AUTOMATIC GAUGE CONTROL SYSTEM: MASS FLOW
LARGE INVENTORY OF SPARE ROLLS, BACKUPS, ETC.
DRIVE MOTOR: 600 HP, 300-750 RPM, 1050 AMPS,
RELIANCE WITH SCR CONTROLS
UPGRADED IN 2008
INCLUDES THREE (3) SETS OF BACKUP BEARINGS
INCLUDES A HUGE INVENTORY OF WORK ROLLS AND PARTS
INCLUDES ALL LUBRICATION TANKS, PUMPS, PIPING, SPARES, DRAWINGS,
CONTROLS, OPERATOR STATIONS, FUME EXHAUST SYSTEM AND SOLID BLOCKS
MILL IS STILL INSTALLED AND CEASED OPERATION IN 2013
This machine is listed for sale by National Machinery Exchange Inc
located in Newark, New Jersey