Year 1985

1. OD and thickness for:
- Dia. 100 container: Min - 30*5mm , Max - 42*8mm
- Dia. 125 container: Min - 32*5mm, Max - 64*20mm
- Dia. 150 container: Min - 38*4mm, Max - 80*30mm

2. Type of lubricant for SS Pipe - glass powder

3. Yield ratio - 4% of wastage

4. Tolerance on OD. thickness and ovality of pipe - according to

international rules of the hot rolling products

The Press:

- Nominal Static Capacity.....1600 tons
- Function Presure............315 Kgf/cm
- Nominal Capacity of device for the shifting of Fishing Tap:
- Advance................................... 100 tons
- Pull Back................................. 160 tons
- Principal Piston Stroke................... 1900 mm
- Stroke of Piecer.......................... 900 mm
- Container Stroke.......................... 380 mm
- Range of the Billets Diamters............. 95-180 mm
- Range of the Billets Lengths.............. 250-700 mm
- Maximum speed for Extrusion to 80% of Press Capacity 200
mm/sec
- Nominal complete cycle time push to push.. 14 seconds

Air-water Accumulator Station
- Working Nominal Pressure............. 315 Kg/cm2
- Number of High Pressure Containers... 1
- Total Volum of Accumulator........... 3 m3
- Useful Water Vilume.................. 450 liters
- High Pressure Pumps number........... 2
- Pump Capacity........................ 320 l/min
- Revolution of Planetary Spindle...... 332 rpm
- Absorption Pressure.................. ATMOSPHERICS
- Engine for Pumps acting.............. 200 Kw 1500 rpm
- Reducing Rapport..................... 4,49

Oil Hydraulic Units
- For Press Adjustment Device:
- Tank Volume............. 367 liters
- Engine for Pump acting.. 7,5 Kw 1500 rot/min
- For Fishing Tap Shifting Device, Container, Screw Sliding and
Auxiliary Equipment:
- Tank Volume............................. 5000 liters
- Engines for Pump's acting (4 pieces).... 55 Kw 15000 rot/min

Pneumatic Devices
- Air Pressure for Auxiliary Equipment..... 5-7 Kgf/cm2
- Air Pressure for Water Valves............ 2,5 - 2,8 Kgf/cm2

Electric Engines for Auxiliary Equipment
- Engine of Saw............................ 22 Kw 1500 rot/min
- Brush Engine............................. 3 Kw 1500 rot/min

Press Features:

Internal Piercing
Aldrich High Presssure Pumps
Run Out Table & Stacking System
Numerous Spare Containers
Large Amount of Tooling for Various Hollows Shapes and Sizes
Otto Junker Induction Heating System
Die Cleaner

This machine was built new in 1985, designed for the production of stainless

steel and high alloy seamless tube. It has been in service of actual

production for 2 to 3 years, only.

This machine is listed for sale by National Machinery Exchange Inc located in Newark, New Jersey