swpc(1,"http://uen.hsix.com/machpict/013510/410007.jpg")
Brand New Colchester Engine Lathe 8116 VSJ #410007)
Make: Colchester Model: 8116 VSJ
SPECIFICATIONS:
Height of Center (in.): 11.02
Swing over Bed (in.): 21.81
Swing in Gap (in.): 32.68
Width in Front of Faceplate (in.): 8.50
Swing over Cross Slide (in.): 14.57
Bedway Width (in.): 15.75
Distance between Centers (in.): 80
Travel of Cross Slide (in.): 11.81
Width of Cross Slide (in.): 8
Travel of Top Slide (in.): 7.50
Width of Top Slide (in.): 6.80
Spindle Bore (in.): 4.09
Spindle Nose (Camlock): D1-11
Spindle Nose Taper:MT-5
Number of Spindle Speeds: 3
Spindle Speed Ranges (RPM):
Low Range: 18 - 200
Mid Range: 55 - 605
High Range: 100 - 1,800
Longitudinal Feed Range (in./rev.): 0.0016 - 0.11
Cross Feed Range (in./rev.): 0.0008 - 0.055
Number of lnch Pitches: 73
Range of Inch Pitches (TPI): 2 - 84
Number of Metric Pitches: 51
Range of Metric Pitches (mm): 0.2 - 14
Number of Diametral Pitches: 27
Range of Diametral Pitches (DP)L 8 - 72
Number of Module Pitches: 51
Range of Module Pitches (mm): 0.2 - 3.5
Tailstock Quill Travel (in.): 7
Tailstock Quill Diameter (in.): 3.74
Tailstock Quill Taper: MT-6
Spindle Motor: 15 HP,
208V/230V/3 Phase/60 Hz.
or 460V/3 Phase/60 Hz.,
Prewired: 230V
Shipping Dimensions (in./L x W x H): 140 x 51 x 51
Shipping Weight (lbs.): 6,283
STANDARD FEATURES
State of the art AC inverter variable speed spindle drive featuring surface mount technology to give compact size and high reliability
Infinitely variable spindle speeds, you can get the right spindle speed very quickly with a response like a CNC lathe, displayed on headstock
Precision Gamet® tapered roller spindle bearings
Electromagnetic spindle brake
Three headstock gear ranges for a wide spread of constant power
- 33 to 1 - better than most CNC lathes
Spindle bearings, gears and shafts are lubricated by a forced lubrication system
Interlocked end guard door with easy access for maintenance and changing end train gear
Leadscrew reversing box for faster thread cutting - reversal of the leadscrew with the spindle running at low speed
An easy-to-read index plate makes it simple to select the proper feed or threads
Chuck guard with limit switch
All bedways are induction hardened and precision ground
Anti-friction carriage ways. Low-friction Moglice PTFE material between the saddle and bed for minimal bed wear and longer machine life
Extra wide heavy-duty cast iron bed with triangular webs for exceptional torsional stiffness and excellent chip clearance
Single piece leadscrew cover protects leadscrew from chips
Heavyweight cast iron base provides the maximum support for the bed combined with sloping top surfaces to prevent the accumulation of coolant
Rapid power traverse to cross slide and carriage available from one lever mounted on saddle
Saddle mounted chip guard and full rear splash guard
Large capacity rollout wheeled chip bin for easy chip disposal
Heavy duty tailstock with extra heavy-duty quill for excellent rigidity
Model 8054VSJ shown
Voltage requires 208V/230V/3 Phase/60 Hz. or 460V/3 Phase/60 Hz., prewired 230V
STANDARD ACCESSORIES
Electromagnetic Spindle Brake
Spindle Center Bushing
(2) Morse Taper Centers
Chuck Guard
Leadscrew Cover
Inch Threading Dial
Forward/Reverse/Stop Switch
Lockable Isolator Switch
Emergency Stop Button
One Shot Saddle and Cross Slide Lubrication
Coolant System
Full Rear Splash Guard
Tool Kit
Instruction and Parts Manual
OPTIONAL ACCESSORIES: Please call for more detail information
12" 3-Jaw Chuck
15" 3-Jaw Chuck
16" 4-Jaw Chuck
20" 4-Jaw Chuck
12" 6-Jaw Chuck
15" 6-Jaw Chuck
3/8" - 9" Steady Rest
6-1/8" - 15" Steady Rest
Follow Rest
20" Slotted Face Plate
27" Slotted Face Plate
Rapid Power Traverse to Cross Slide and Carriage
Front Mount Handwheel 5C Collet Chuck
Key Operated Collet Chuck
Lever Operated Dead Length Collet Chuck
One Position Carriage Stop
Five Position Carriage Stop
4-Way Tool Post
Turret Tool Post
Quick Change Tool Post and Holders Set
Live Center
Work Light
5C Round Collet Set
5C Lever Type Collet Closer
Telescopic Taper Attachment
Tool Post Grinder
Digital Readout System
OTHER MODELS/SIZES AVAILABLE
This machine is listed for sale by Nevins Machinery Concepts
located in Brockton, Massachusetts
| |