SPECIFICATIONS
SWING OVER BED: 17″
SWING OVER CROSS SLIDE: 10-9/16″
SWING OVER GAP: 24″
LENGTH IN FRONT OF FACE PLATE: 5-7/8″
HEIGHT BETWEEN FLOOR SURFACE
AND CENTER LINE: 42-3/8″
DISTANCE BETWEEN CENTERS: 43-1/2″
SPINDLE BORE: 2-1/4″
TAPERS OF SPINDLE HOLE AND CENTER: MT NO 6 x NO 4
SPINDLE NOSE: D1 6
RANGE OF SPINDLE SPEEDS (CHANGES): 12
SPINDLE SPEEDS: 35, 52, 75, 110, 160, 230, 330, 490, 650, 950, 1350, & 2000 RPM
NUMBER OF FEEDS (CHANGES): 16
FEED RANGE (LONGITUDINAL): 0.0012 0.034 IPR
FEED RANGE (CROSS): 0.0008 0.023 IPR
DIAMETER AND PITCH OF LEADSCREW: 1-3/8″ 4 TPI
INCH THREADS: 2 72 TPI (44 KINDS)
METRIC THREADS: 0.2 14mm (39 KINDS)
MAXIMUM TRAVEL OF TAILSTOCK QUILL: 5-7/8″
MAXIMUM TRAVEL OF CROSS SLIDE: 10-2/5″
MAXIMUM TRAVEL OF COMPOUND: 5-7/8″
TAILSTOCK QUILL O.D. & TAPER: 2-3/8″ / MT #4
WIDTH OF BEDWAY: 11-3/4″
LENGTH OF BEDWAY: 82-5/8″
MAIN DRIVE MOTOR: 7-1/2 HP

GENERAL
NET WEIGHT, APPROX: 3,520 LBS
MEASUREMENT: 180 CU FT
FLOOR SPACE: 98″ x 41″

STANDARD EQUIPMENT
7.5 HP, 1 SPEED MOTOR FOR 220/440V, 3 PH, 60 CYCLE WIRING
12 SPINDLE SPEEDS (35 – 2,000 RPM)
2-1/4″ SPINDLE BORE
SPINDLE NOSE D1 6 CAMLOCK
HEADSTOCK SPINDLE CENTER ADAPTER, MT #6 TO MT #4
GROUND STEEL CENTERS FOR HEADSTOCK AND TAILSTOCK (MT #4)
TIMING BELT FOR GEAR CHANGES
THREAD CHASING DIAL
4 WAY TOOL POST WITH T SLOT
HARDENED AND GROUND BEDWAYS AND CROSS SLIDE
AUTOMATIC LONGITUDINAL MULTIPLE FEED STOP
HALOGEN WORK LIGHT
TOOL BOX WITH NECESSARY WRENCHES AND SPANNERS
INSTRUCTION MANUAL AND PARTS LIST

STANDARD ACCESSORIES
10″ 3 JAW SCROLL CHUCK
COOLANT SYSTEM WITH PUMP AND PIPING
4.7″ STEADY REST WITH ROLLER JAWS
FULL LENGTH SPLASH GUARD
8″ DRIVE PLATE
14″ FACE PLATE

This machine is listed for sale by located in Bethlehem, Pennsylvania