SPECIFICATIONS
GRINDING CAPACITY: 6” W X 12” L
HEIGHT OF WORK GROUND
WITH WHEEL – 8” OD X 1-1/4” HOLE: 12”
DISTANCE – CENTER OF WHEEL SPINDLE TO
TOP OF TABLE: 16” MAX – 3.5” MIN
SPINDLE
ANTI-FRICTION BEARING UNIT WITH ORIFLEX DRIVE
THRU 6 “O” RINGS
DRIVE: 1 HP
SPEED (NO LOAD) 2,860 RPM
GRINDING WHEEL DIAMETER: 8”
GRINDING WHEEL THICKNESS: 1/2”
HOLE SIZE: 1-1/4”
LUBRICATION: SEALED

SPINDLE SLIDE UPRIGHT
TRAVERSE MOVEMENT BY HANDWHEEL: 7”
HANDWHEEL RIM GRADUATED TO READ TO: .0002”
FINE FEED – READS TO: .0001”
ONE REVOLUTION OF HANDWHEEL MOVES
GRINDING WHEEL TRANSVERSELY: .100”

TABLE
WORKING SURFACE: 6” X 12”
NUMBER OF T-SLOTS: 1
WIDTH OF T-SLOTS: 9/16”
FRONT ROLLERS MOUNTED IN: FLAT CHANNEL
REAR ROLLERS MOUNTED IN: 90° V-CHANNEL
LONGITUDINAL TRAVEL (MAXIMUM): 14”
LEVER OPERATED TRAVERSE (OPTIONAL)
180 LEVER MOVEMENT EQUALS APPROX.: 11” TABLE TRAVEL

WHEEL SPINDLE VERTICAL SLIDE
VERTICAL ADJUSTMENT: 12-1/2”
OPERATED BY HANDWHEEL GRADUATED TO READ: .0002”
MICROMETER VERTICAL FEED
HANDWHEEL READS TO: .0001”
ONE REVOLUTION OF HANDWHEEL MOVES
GRINDING WHEEL VERTICALLY: .050”

GENERAL
NET WEIGHT, APPROX: 1,425 LBS
ELECTRICS: 440 VOLTS, 3 PH, 60 CYC

EQUIPPED WITH
6” X 12” WALKER PERMANENT MAGNETIC CHUCK
FINE FEEDS VERTICAL & CROSS
WHEEL HUB
AUTO LUBE
LEVER OPERATED TRAVERSE

This machine is listed for sale by located in Bethlehem, Pennsylvania