Standard Features:
• Universal tool and cutter grinder, Cincinnati type
• Designed as a versatile tool sharpener and can also be used for light cylindrical, surface and internal grinding operations with some optional accessories.
• The wheelhead can be tilted +/- 15 degrees, and swiveled 360 degrees in the horizontal plane. This allows the setting of rake and relief angles.
• The wheelhead spindle is supported in two pairs of angular ball bearings, which are preloaded.
• The spindle is lubricated for life.
• The workhead can be positioned along the table and can be swiveled vertically and horizontally. It has a taper hole in each end of the spindle (one side is ASA50 and the other MT5)
• The table can be swiveled +/- 60 degrees. This along with the wheelhead swiveling permits grinding long cutters and tools.
• The table ways are hardened and ground.
• Antifriction ball bearing assemblies allow easy and smooth positioning.
• Fine feed knobs on the right and left side of the table allow fine to rapid feed range of the table. A crank allows fine feed control on the right side of the table.
• The tailstock can be positioned longitudinally along the table. The center is retractable for easy workpiece loading between centers.
• Table dogs are used for table positioning and cushioning
• Fully centralized lubrication system for the longitudinal and cross ways, and cross feed screw and nut.
• Optional grinding attachments are available to allow face mill, radius, helical, cylindrical, internal, surface, drill point, lathe and planer tool grinding.

Standard Equipment:
• Workhead • Leveling pads (3 pcs.) • Draw-in bolts for workhead and washer • Collet wrench • Left and Right hand tailstock • Wheel guard holder (long and short) • Belt for spindle drive (Poly-flex belt) • Grinding wheel sleeves (5) Reducing collet B & S or MT #5 x #2, 3 & 4 (3) • Sleeve extracting bar • 4" spindle extension • Ejector rod • 4" extension wheel sleeve & collar • Center gauge • Center for workhead spindle B & S or MT #2 • Pin wrench • Plain tooth rest holder (with off set blade) (2) • T-wrench for grinding wheel sleeve • Washer for 1/8" grinding wheel • Grinding wheel (7 in 6 sizes: 6x3/4x1.25, two 6x1/2x1.25, 3.5x1.5x1.25, 4x1/16x1/2, 5x1.5x1.25, 3x1/2x1/2") • Wheel guards (4) • Diamond dresser holder • Touch -up paint • Tool cabinet • Micrometer adjustable tooth rest (w/ round top table) • Double end wrench • Extension & washers of slit-saw & side-mill cutters • Universal tooth rest plate & blade holder extension • Allen type wrench • Nut wrench (2) • Driver

Specifications:
Swing Over Table: 10"
Distance Between Center: 27 1/2"
Distance Between Tailstock & Workhead:
22 3/4"
Taper Hole In Workhead Spindle: ASA No.50 & M.T. No.5
Table T-Slot (Number & Size): One 0.565"
Table Working Surface: 5 5/16" x 37"
Grinding Wheel Spindle RPM:
2600, 3700, 6200 RPM
Grinding Wheel Spindle Motor: 1 HP
Table X Travel: 16"
Table Y Travel: 10"
Cross Movement of Saddle: 10"
Graduation for Table Swivel Movement: ±60°
Table Graduation on End, For Taper of: ±10°
Wheel Head Tilts: ±15°
Wheel Head Swivels: 360
Wheel Spindle Center to Top of Table: Max 12"-Min 2"
Wheel Spindle Center to T-Slot Center: Max 16 1/2"- Min 6 1/2"
Voltage: Choose 220 or 440 Volts, 3 phase
Net Weight: 2,560 Lbs.
Machine size: 58" x 58" x 60"

Optional Accessories:
• Dust Collector
• Face Mill Grinding
• Radius Grinding 0-1" (4" Max. Dia of Cutter)
• Radius Grinding 0-2" (11 3/4" Max. Dia of Cutter)
• Helical Grinder
• Cylindrical Grinding W / 3Jaw Chuck
• Internal Grinding
• Work Head Indexing
• Extended Grinding Wheel Spindle
• Surface Grinding
• Lathe And Planer Grinding
• Spring Collet Set
• Coolant System
• Drill Point Grinding
• Wet Grinding
• Wheel Flange.

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois