FEATURES:
* Two full size hydraulic powered cavities fit any two sets of tooling for double versatility.
* Punching station included
* Flat bar shearing station with blades included - low rake
* Angle shearing station with blades included
* Electronic Up and Down Stroke Control System
* Adjustable steel punch strippers
* Fast adjusting hold down bars
* Threaded holes in tables for jigs
* Pedestal Die Table (for punching angle iron 2" on center)
* Pipe coupling welded to back for optional back gauge
* Slots for gauge feeding tables
* Comfortable working heights
* Remote foot pedal operation
* Integral lifting lug for instant portability
* Direct drive pump - no belts
* Fully Guarded * Sound insulated
* Hydraulic system fully charged - ready to operate
* Made in USA

CAPABILITIES:
PUNCHING:
Rated capacity: 55 Tons
Throat: 7"
Standard
Punching assembly: 1-1/16" diameter - 5/8" plate
7/8" diameter in 3/4" plate
Optional Oversize
Punching assembly: 1-3/8" diameter in 1/2 plate

FLAT BAR SHEARING:
Max. width: 1/2" x 12" or 3/8" x 14"
Max. thickness: 3/4" x 4"
Max. round capacity: 1-1/8"
Max. square capacity: 1-1/8"

ANGLE SHEARING:
Maximum Size: 4" x 4" x 1/4"
Maximum thickness: 3" x 3" x 3/8"

Edwards 55 ton - Page 2 of 2


GENERAL SPECIFICATIONS:
Throat depth: 7"
Open height: 8-1/8"
Shut height: 6-7/8"
Stroke: 1-1/4"
Cycle time: 2 seconds to shear 1/2" x 2" steel flat bar
Electric motor standard: 5 HP, 3 phase, 208/240 volts, 3450 RPM, 14 amps
Electric motor options: 5 HP, 3 phase, 440/480 volts, or 575 volt, 7 amps ($95 extra)
(Extra cost) 5 HP, 1 phase, 208/240 volts, 3450 RPM, 26 amps ($245 extra)
Hydraulic pump size: 3.5 gpm - 1 stage
Valve Pressure: 3000 psi
Cylinder: 1 - 4-1/2" cylinder
Machine Dimensions: 36" x 42-1/2" x 57"High

for more info visit our website at:
http://www.americanmachinetools.com/ironworker.htm

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois