1600 LATHE SPECIFICATIONS:
Swing over Bed: 16 inches (400mm)
Swing over Cross Slide: 10 inches (250mm)
Distance between Centers: choose from
40" (1000mm), 60" (1500mm), 100" (2500mm)
Drive Motor: 10 HP
Voltage: choose 208, 220, 440 or 575
Electrical Controls: 115 Volts
Spindle Bore: 2.06 inches (52mm)
Spindle speeds: 18
Speed range: 40 to 2000 RPM
Feeds & thread selections: 66
Inch feed range: .0015-.105 inch/rev.
Inch thread range: 2 to 127 T.P.I.
Metric feed range: .04 to 2.67 mm/rev.
Metric lead range: .2 to 14 mm
Handwheel - per revolution: 1 inch (25.4mm)
Half nuts: Double
High Speed threading to 800 RPM
auto carriage stop: ± .005 in. (±.13mm)
Feed torque control: Variable
Carriage length on bed: 18.25" (465 mm)
Carriage bridge width: 8.5" (215 mm)
Cross-slide length: 20" (508 mm)
Cross-slide travel: 8.5" (215 mm)
Compound travel: 3.8" (96 mm)
Direct reading dial graduation: .001" (.02mm)
Tailstock quill diameter: 2.44 in. (62mm)
Tailstock quill travel: 5" (127 mm)
Tailstock: #4 Morse Taper with tang
Tailstock offset: ± .75 in. (± 19mm)
Bed Width: 11 in. (280mm)
Model 16 x 60
Shipping Weight: 3050 Lbs. (1386 kg)
Shipping Crate: 36" wide x 108" long x 60" H
(.9m wide x 2.8m long x 1.5m high)

• Quality made in Canada
• Controls are Inch & Metric
• Electric brake is self actuating
• Spindle held by 3 bearings
• D1-6" camlock
• All hardened gears - no clutches
• Hi-Lo Neutral shifter
• Direct reading speed dial
• Complete range of inch and metric threads - switchable
• Double half nuts
• "Dial in" feeds under power
• Fully enclosed gearbox
• No change gears needed
• Bi-direction auto carriage stop (feeds and threads)
• Apron has feed reverse
• Leadscrew reverse
• Extended cross-slide for tracer mount
• One shot lube to carriage and cross slide
• Nitrided screw with anti-backlash nuts
• Ball chasing stop
• Tail Stock is quick double clamping
• Hardened quill with tang drive
• Auto center eject - non locking handwheel
• Bed is made from grade 'A' meehanite casting
• Hardened ways
• Chip clean out at front & rear
• Full length rear splash guard
• 2 year warranty on parts made by Standard Modern.
Warranties of other components are per their manufacturers.

OPTIONS:
• 3 jaw chuck • 4 jaw chuck
• Turret toolpost
• Steady Rest: 6 " (150mm) dia.plain or roller
• Follow rest: 2.5" (63mm) dia.plain or roller
• Faceplate: 15" (380mm) dia.
• Coolant system
• Digital Readout
• Telescopic Taper Attachment:
± 10 deg x 12" (305mm) stroke
• CSA approved
visit http://www.americanmachinetools.com/lathe.htm for more info

This machine is listed for sale by American Machine Tools Company located in Chicago, Illinois