NEW size=3>SHARP AUTOMATIC SURFACE GRINDER
MODEL: SH-1224-2A
SPECIFICATIONS:
CAPACITY
TABLE TRAVEL: ......................... 14” X 27.6”
SPINDLE CENTER TO TABLE SURFACE: ...... 19.3”
TABLE
WORKING SURFACE (W X L): .............. 11.6” X 23.6”
LONGITUDINAL HYDRAULIC TABLE FEED: .... 6.6-82 IPM”
FEED
INTERMITTENT CROSS FEED: .............. 0.004-0.4 IPM
CONTINUES CROSS FEED: ................. 39 IPM
NUMBER OF GRADUATIONS ON DIAL: ........ 200
FEED PER GRADUATION: .................. 0.0005”
FEED PER REVOLUTION: .................. 0.1”
RAPID DOWN FEED (OPTIONAL): ........... 18.9 IPM
VERTICAL TRAVEL
NUMBER OF GRADUATIONS: ................ 500
FEED PER GRADUATION: .................. 0.0001”
FEED PER REVOLUTION: .................. 0.05”
RAPID DOWNFEED (OPTIONAL): ............ 18.9 IPM
WHEEL SIZE (OD X WIDTH X ID): ......... 14” X 1.25” X 5”
SPINDLE MOTOR: ........................ 3 HP
COOLANT SYSTEM MOTOR: ................. 1/8 HP
APPROXIMATE WEIGHT: ................... 4,000 LBS.
DIMENSIONS: ........................... 76.8“X73.6”X71” ( L XW XH )
TOTAL POWER CONSUMPTIONS
220V .................................. 5.4KVA/25 AMPS
440V .................................. 5.4KVA/12.5 AMPS
FEATURES:
2-AXIS AUTO AND MANUAL DOWN FEED OR 3-AXES AUTO WITH OPTION OF DOWNFEED CONTROL
3HP MOTOR
SPINDLE SPEED 1,720 RPM
2-V WAYS
EXTRA WIDE BED
DOUBLE LONGITUDINAL “V” WAYS AND CROSS “V” WAYS
HYDRAULIC TABLE (WITH OVER TRAVEL PROTECTION)
AUTO CROSS FEED (INTERMITTENT AND CONTINUOUS MODE)
SLIDE WAYS ARE HAND SCRAPED AND TURCITE COATED
ANNEALED CASTINGS FOR GREATER MACHINE STABILITY
AN OPTIONAL PROGRAMMABLE SPINDLE DOWNFEED SYSTEM WITH USER FRIENDLY CONTROL
STANDARD EQUIPMENT:
GRINDING WHEEL 14” X 1.25” X 5”
AUTO LUBE SYSTEM
COOLANT SYSTEM, 25 GALLON TANK
WHEEL ADAPTER/FLANGE
WHEEL BALANCING ARBOR
GRINDING WHEEL BALANCING STAND
DIAMOND DRESSER
SPLASH GUARD BOTH FRONT AND BACK (NOT SHOWN ON PHOTO
TOOL KIT INCLUDES:
MACHINE MANUAL, HALF NUT WRENCH, WRENCH 17M, 19M, SET OF 6 ALLEN WRENCHES, PHILLIP SCREW DRIVER, OIL CAN, GREASE GUN, REAR WAY COVER BRACKET, PIN FOR INDICATOR, CAN OF PAINT
** NOTE, PLEASE ORDER ONE OF THE MAGNETIC CHUCKS IN THE OPTION LIST. THIS GRINDER DOES NOT WORK WITHOUT IT.
OPTIONAL ACCESSORIES:
440 TRANSFORMER-3HP (FOR MICRO CONTROL DWON FEED SYSTEM)
12"X24" KANETSU ELECTROMAGNETIC CHUCK W/CONTROL
12” X 24” KANETSU ELECTROMAGNETIC CHUCK W/CONTROL (FINE POLE)
12” X 24” WALKER ELECTROMAGNETIC CHUCK W/SMART 1 C CONTROL (FINE POLE)
TOUCH SCREEN PROGRAMMABLE MICROPROCESSOR CONTROL SPINDLE
DOWNFEED SYSTEM WITH Z AXIS MOTION CONTROL
DRESSER COMPENSATION PACKAGE INSTALLED, NEEDS TO PURCHASE WITH SH-50 $ 9,500.00
SH-011 - DOWNFEED SYSTEM CONTROL
(440V MACHINES NEEDS TRANSFORMER FOR PROGRAMMABLE MICRO CONTROL DOWNFEED SYSTEM.)
PARALLEL DRESSER (MANUAL)
RADIUS AND ANGLE DRESSER
HALOGEN WORK LIGHT
COOLANT SYSTEM W/DUST COLLECTOR (25 GAL)
COLLANT SYSTEM W/PAPER FILTER (25 GAL)
COOLANT SYSTEM W/PAPER FILTER & MAGNETIC SEPARATOR (25 GAL)
(FOR SH-920 & SH-1224)
PAPER FILTER REFILL
SPARE WHEEL ADAPTOR (FLANGE) SH-920 – SH1224
RAPID TRAVERSE UP/DOWN WHEEL HEAD
CRISIS FEED
OIL MIST COLLECT
DUST SUCTION COOLING SYSTEM
FOR MORE INFORMATION: Call Rob at 973-497-7570