NEW SHARP MODEL: 1880LV PRECISION LATHE
VARIABLE SPEED
*** MADE IN TAIWAN ***
STANDARD EQUIPMENT:
3-Jaw Chuck (10”)
Face Plate (16”)
American Tool Post
Follow Rest ( 0.59” – 3.15”)
Steady Rest w/ bronze tip (1/2 - 6”)
Coolant System
Full Length Splash Guard
Halogen Work Light
Micrometer Carriage Stop
Longitudinal Carriage Stops
Machine is set only for 220 V. Needs an optional transformer for 440V applications.
Tail Stock & Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, 2 sets of dead center, Pin for Indicator, Can of Paint
FEATURES:
D1-8 Camlock, 3.18” Hole
Direct Selection For Inch/Metric Threads
One Piece Cast Meehanite Bed
7-1/2 Hp Spindle Motor
Digital Variable Speed (20-2,000 Rpm)
Digital Variable Head on “LV” Models Wired at 220V only. 440V Optional
SPECIFICATIONS:
Capacity
Swing Over Bed: 18.5”
Swing Over Cross Slide: 11”
Center Height: 9.25"
Swing Over Gap: 27-1/8”
Width of Gap: 11.75"
Distance Between Centers: 86.6”
Headstock
Spindle Nose Type: D1-8 Camlock
Spindle Bore: 3-1/16”
Spindle Speeds (DIGITAL VARIABLE SPEED: 20-2,000 rpm
Taper of Spindle Bore: MT#6
Taper of Center: MT#5
Threads and Feeds
Longitudinal Feeds – in/rev (18): 0.002 - 0.032”
Cross Feeds – in / rev {#}: 0.0001 –0.0094” {12}
Inch Threads (#): 4-56 tpi {36}
Metric and Module Threads {#}: 0.5-7mm {17}
D.P. Threads (36): 4-56 mm
Leadscrew Pitch, Diameter: 4 tpi, 1-3/8”
Carriage
Cross Slide Travel: 9-7/8”
Compound Rest Travel: 5.3”
Compound Width: 5.0”
Bed
Bed Length: 110”
Bed Width: 11-3/4”
Tailstock
Quill Travel (graduated: 5-1/2”
Quill Diameter: 2-11/16”
Quill Taper: MT#4
General
Spindle Motor (220V or 440V, 60, 3): 7-1/2 hp
Net Weight (approx.): 5,300 LBS
Dimensions ( L X W X H): 134.6” X 21” X 48”
Standard Color: Gray
Electrical:
Voltage : **230V
**(440V requires optional transformer $1,275)
Phase: 3 phase
Total Power Consumptions
¨ 230V 8KVA/25 amps
¨ 460V 8KVA/12.5 amps
FOR MORE INFORMATION: Call Terry at 973-497-7612