NEW SHARP MODEL: 1880L PRECISION LATHE
MADE IN TAIWAN
STANDARD EQUIPMENT:
- 3-Jaw Chuck 10”
- Coolant System
- Halogen Work Light
- Face Plate (16”)
- Steady Rest (1/2” – 6”)
- American Tool Post
- Full Length Splash Guard
- Follow Rest (0.59” – 3.15”)
- Longitudinal Carriage Stops
- User can choose either 220V or 440 V application. 575 V needs an optional transformer
- Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, Can of Paint
FEATURES
D1-8 Camlock
- 3” Spindle Bore
- Direct Selection for Inch/Metric Threads
- One Piece Cast Meehanite Bed
- 7-1/2 Hp Spindle Motor
- 12-Speed Gear Head (40-2,000 Rpm)
**Digital Variable Speed (DVS) Now Available! (LV TYPE)
SPECIFICATIONS:
Capacity
Swing Over Bed: 18.5”
Swing Over Cross Slide: 11”
Center Height: 9.25"
Swing Over Gap: 27- 1/8”
Width of Gap: 11.75”
Distance Between Centers: 86.6”
Headstock
Spindle Nose Type: D1-8 Camlock
Spindle Bore: 3-1/16”
Spindle Speeds (12 Speed): 40-2,000 rpm
Taper of Spindle Bore: MT#6
Taper of Center: MT#5
Threads and Feeds
Longitudinal Feeds – in/rev (18): 0.002 - 0.032”
Cross Feeds – in / rev {#}: 0.0001 –0.0094” {12}
Inch Threads (#): 4-56 tpi {36}
Metric and Module Threads {#}: 0.5-7mm {17}
D.P. Threads (36): 4-56 mm
Leadscrew Pitch, Diameter: 4 tpi, 1-3/8”
Carriage
Cross Slide Travel: 9-7/8”
Compound Rest Travel: 5.3”
Compound Width: 5.0”
Bed
Bed Length: 110”
Bed Width: 11-3/4”
Tailstock
Quill Travel (graduated): 5-1/2”
Quill Diameter: 2-11/16”
Quill Taper: MT#4
General
Spindle Motor (220V or 440V, 60, 3): 7-1/2 hp
Net Weight (approx.): 5,425 LBS
Dimensions (L X W X H): 134.6” X 21” X 48”
Standard Color: Gray
Electrical:
Voltage 230V & 460V
Phase 3 phase
Total Power Consumptions
¨ 230V 8KVA/25 amps
¨ 460V 8KVA/12.5 amps
FOR MORE INFORMATION: Call Terry at 973-497-7612