ACRA MODEL 5VHL HEAVY DUTY BED TYPE WITH HORIZONTAL & VERTICAL BORING & MILLING MACHINE |
|
Stock Code: |
15430 |
Price: | $RFQ |
Subcategory: | Miscellaneous Machinery |
Manufacturer: |
Acra |
Model: |
5VHL |
Condition: | New |
<p class="MsoNormal"><strong>ACRA MODEL 5VHL HEAVY DUTY BED TYPE WITH HORIZONTAL & VERTICAL BORING & MILLING MACHINE</strong></p>
• The X, Y and W axes of 5VHL are equipped with ball screw and AC servo motor.<br />• There are three functions: Rapid & Jog & Manual feed.<br />• The Vertical Spindle Speed, Saddle and Table are equipped with pneumatic clamp device.<br />• The Horizontal Spindle Speed is 40-1450 RPM and with 12 steps speed changes.<br />• A Counterweight Balance permits the head to travel smoothly and to retain its accuracy stability.<br />• The X-Axis Travel up to 2000 mm is available on your request.<br /><br />Table & Saddle:<br />• The Table and Saddle are made of high-quality cast iron which has been carefully stress relieved.<br />• Way surfaces are hand scraped and finished<br /><br />Feed Box:<br />• Table and Saddle feed can be driven by power or manual operation, and is easy to change speeds and to operate.<br />• Because of the large range of speeds, it is simple to go from low speed heavy cutting to high speed<br />finishing cutting.<br /><br />Backlash Eliminator:<br />• Table feed system is equipped with easy adjustable backlash eliminator to increase operating stability and cutting efficiency.<br />• Large supporting surface and narrow square guide ways provide stable and smooth sliding.<br />Accuracy of Table & Saddle:<br />• Table and saddle are made of high quality cast iron, treated through stress relieving.<br />• The sliding surfaces are scrapped and finished.<br />• The upper, rear and front reference surfaces are ground, T-slots are correctly machined. So that the flatness, parallelism and squareness all meet the requirements of operation and are convenient in setup the work pieces.<br /><br />Operation Device:<br />Whole structure of the machine is quite simple.<br />The operation device, such as the switch and handle, are installed in the front of the machine, so that all functional operations are at the operator’s fingertips.<br />A Counter Balancing weight is housed in the column to guarantee the smooth travel of the spindle head.<br /><br />Anti-Wearing Ways:<br />• Casting by high quality case iron.<br />• Completed annealing process to release residual stress, and all sliding ways hardened and ground to reserve high accuracy and wear resistance.<br /><br />Specifications:<br />Table Travel (Longitudinal): 59”<br />Table Travel (Cross): 23-5/8”<br />Vertical Spindle Head Travel (Vertical): 27-9/16”<br />Horizontal Spindle Head Travel (Vertical): 25-9/16”<br />Vertical Spindle Nose to Tabletop: 3-15/16” ~ 31-1/2”<br />Vertical Spindle Center to Column Front: 21-5/8”<br />Distance Between Horizontal/Vertical Spindle Center: 21-5/8”<br />Table Working Area: 86-5/8” x 19-11/16”<br />T slot (Wide x No. x Pitch): 0.709” x 5 x 3-9/16”<br />Tabletop to Floor: 34-1/4”<br />Spindle Nose: ISO R297 No.50<br />Vertical Spindle Speeds: 45-1,500 RPM<br />Horizontal Spindle Speeds: 40-1,450 RPM<br />No. of Vertical spindle speed: 12 Steps<br />No. of Horizontal spindle speed: 12 Steps<br />Feeds (vertical spindle): 0.05″-0.2″/min<br />Feed & Rapid:<br /> Rapid Traverse (Longitudinal & Cross): 129-7/8″/min<br /> W-Axis Rapid traverse(Vertical): 150″/min<br /> Feed Rates(Longitudinal &Cross): 1-1/8″~ 39-3/8″<br /> Horizontal Feed Rates (Vertical): 1-1/8″ ~ 39-3/8″<br /> Change of Feeds: Infinitely Variable<br />Motors:<br /> Vertical Spindle: A
This machine is listed for sale by Blumberg Machinery
located in Bannockburn, Illinois