CALL FOR AVAILABILITY AND BEST PRICING!

FEATURES:
When looking for a conventional style knee milling machine, Baileigh Industrial leads the pack in both quality and standard features. Baileigh Industrial's VM-949 milling machine is no exception and is great for any small to medium size machine shop or fabrication shop. Like all Baileigh machines, it's packed with tons of standard features that are options on most other brands.
The VM-949 is fully variable speed through the use of a Yaskawa inverter drives. Speeds are adjustable from 60 to 4200 rpm. Adjustable spindle speeds help prolong tooling life as well as allows some applications that cannot be done on a standard drill press, such as thermal friction drilling. The VM-949 is available in two different voltages, 220 volt single and three phase, these variances allow the VM-949 to be used in almost any shop.
Rigidity is also very important on a mill that is why Baileigh Industrial went with only the best castings to make the base and frame work out of. The stronger you make the platform the better the cutting is. This is not the place to use an inferior process. To make the VM-949 milling machine even stronger, a NST 40 spindle is standard. This type spindle is stronger and give the operator a choice of larger tooling should the need arise.
Operation of the VM-949 could not be easier as this milling machine has powered X, Y and Z axis. The X and Y axis utilizes a Mitutoyo DRO- digital read out for positioning down to 1/10 of a thousandth of an inch. Other standard features of the VM-949 milling machine include an air draw bar, coolant system with catch tray.

SPECIFICATIONS:
Country of Manufacture: Taiwan
Table Size: 49" x 9"
Spindle Speeds: 60 to 4200 RPM
Table Size: 9" x 49"
Spindle Center To Column Min Max: 8.38"
Spindle Diameter: 3.37"
Spindle Feed Per Rev: .0015"/.003"/.005"
Spindle Head Swivel: 45
Motor Spindle: 3 HP
Travel Auto X Axis: 25.19"
Travel Auto Y Axis: 12"
Travel Auto Z Axis: 16"
Travel Manual X Axis: 28.5"
Travel Manual Y Axis: 12"
Travel Manual Z Axis: 16"
Spindle Nose To Table Min Max: 2.24"
Table Load Capacity: 440 lbs.
T Slots: .625"
Cross Travel Of Ram: 12.59"
Power: 220V / 3-phase
Spindle Travel: 5"
Shipping Dimensions: 60" x 60" x 83"
Shipping Weight: 2,200 lbs.


Specifications are subject to change without notice.

NOTE: Data is provided by the manufacturer.

WARRANTY: 1 YEAR – Parts

This machine is listed for sale by Sierra Victor Industries located in Port Orange, Florida