Piranha P-140 Single Operator Ironworker

With 140 tons of punching force, the Piranha Model P-140 is truly the king of single operator ironworkers.

The P-140 has more standard workstations than any other ironworker in its class. This includes punching, bending, bar shear, angle shear, round bar shear, and an integrated coper/notcher.

The P-140 also has a dovetail slide that allows an operator to switch from punching to bending in just a few seconds (watch the video)

Furthermore, the P-140 has full electrical control of its stroke with a footswitch and limit switch stroke controls for fast punching cycles.

The no slug-loss shearing saves material, keeps the machine area cleaner, and offers larger material capacity than the competition. A wide variety of optional tooling is available to enhance the P-140's capabilities.

Piranha's incomparable integrated coper/notcher station outperforms any other ironworker. Notch from thick to thin, remove the full leg from angle iron, shave even the smallest piece from the end of the work piece, and maintain total control of the part – from any angle.

So, when comparing ironworkers, look at the complete package.
Standard Features

Complete Punching Attachment with split dove tail mounting
5 Punch and Die sets
Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear
Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral
Remote Electric Foot Switch that can be connected at either end of the machine
Electric Limit Switches that can be set for stroke control when using foot control
Set of Round Bar Knives [2 way] (customers choice to 2)
Set of 16.625 Plate Shear Knives [4 way]
Set of 20.5" Plate Shear Knives [4 way] (instead of Round Bar Knives and 16.625" Plate Shear Knives)
Extra Blank Knife to extend shear to 20.5"
Set of Angle Knives [8 way top] [4 way bottom]
Set of Coper Knives [2 way top] [4 way bottom]
Chip Buckets (2 each)
Extra Oil Filter
Coupling Wrench & 3/8" Allen Wrench
Integral Lifting Lug for instant portability

P-140 Capacities & Specifications

Compare capacities & specifications of all ironworkers (pdf)
Throat Depth 12" Coper-Notcher (Tons)
(Max.) 95
4" x 6" x 3/8"
Open Height 15-1/2" Bending Attachment
(Optional) 12", 24"
Closed Height
w/o Die Block 10-1/4" Punch End – Strokes Per Minute
Optional Speed-Up Kit
30 @ 3/4"
35 @ 3/4"
Stroke Length 5-1/4" Work Station Height
Approx. 44"
Platen Table Size (D-W) 14-1/2" x 21" Hydraulics
Pump GPM
System R/V PSI
15
3500
Punch
Hole Size (Max. Material)
Max. Hole Size (Material) 140 Tons
1-3/4" (1")
5" (5/16") Fluid Capacity (gal.) 25
Plate Shear 20-1/2" Long
1" x 14"
3/4" x 18"
1/2" x 20" Motor Std. 230/460 3 Ph.
1800 RPM
Opt Phase & Voltage Available 15 HP 3 Ph.
Angle Shear 6" x 6" x 5/8" Dimensions (Net)
W-L-H Approx. 35" x 90" x 68-1/2"
Bar Shear
Round (min. to max.)
Square (min. to max.)
1/2" to 2"
1/2" to 1-3/8" Weight (Net)
Lbs. Approx. 6200

Price:
800-222-3152
Brand:
MegaFabPiranha
Weight:
0.00 LBS

This machine is listed for sale by A R Tools & Machinery, Inc. located in Spokane Valley, Washington