Ganesh GT-3080 Series CNC Lathe (10″ Bar Capacity) With Fanuc 0i-T-D (Manual Guide i)

Specifications

Swing over Bed 30” (760 mm)
Swing over Cross Slide 19” (480 mm)
Center Height 15” (380 mm)
Bed width of ways 18” (460 mm)
Bed Casting Height 15.75” (400 mm)
Spindle Motor Horsepower (Fanuc 18.5Kw) 30-HP Peak (25-HP 30-min. rated)
Big-Bore Spindle Option – Bore Size 10” A2-15 spindle Big-Bore
Spindle Speeds 18-600 rpm (2-ranges)
Spindle Gear Ranges – 2-automatically selected gear ranges Low 18-186 rpm / High 60-600 rpm
Spindle Torque for 10” bore – low gear / high gear 1475 / 442 ft. lbs. (2000 / 600 Nm)
Workpiece weight limit when held in chuck 1,100 lbs. (500kgs)
Workpiece weight limit when held by chuck and tailstock 2,200 lbs. (1,000kgs)
Workpiece weight limit when held by chuck, steady rest & tailstock 4,400 lbs. (2,000kgs)
Rapid Traverse Feedrate X&Z 394 IPM (10m/min)
X-Axis Cross slide travel 19-5/8” (500 mm)
Z-Axis Longitudinal travel 96”
X-Axis Ball screw Diameter / Servo Motor Power 1.25” (32 mm) / 3.5-HP (2.5kw)
Z-Axis Ball screw Diameter / Servo Motor Power 2” (50 mm) / 4.0-HP (2.9kw)
X-Axis Thrust 65 ft. lbs. (900 Kgf)
Z-Axis Thrust 98 ft. lbs. (1350 Kgf)
Cross slide dimensions WxL 39” x 10” (1000mm x 258mm)
Minimum input unit 0.0001” (0.001mm = 40 millionths”)
Tool Turret- Hydraulic type / LS-200R
Tool stations – any combination of ID/OD tooling /Index time 8-stations / 0.4 second index O.D.
Tooling (additional I.D. & O.D. toolholders in stock) 1” tools w/8-tool clamps provided I.D.
Tooling (40mm when specified for metric users) 4-ID (1.5” bore) holders provided
Tailstock-Air-Assist Manual Positioning – Quill engraved with inch / metric quill graduations
Quill diameter Ø5.0” (125 mm)
Quill stroke (manual quill advance, hydraulic optional) 8″(200 mm)
Quill taper Morse Taper # 6
Electrical / Hydraulic / Coolant Systems
Power Requirements – FANUC 0i-TD control, motors & drives 30kVA, 220vac ±5%,
Hydraulic Motor Power 2-H.P.
Hydraulic Pressure 500 PSI / Mobil 32 oil
Coolant Pump 3/4-HP

Equipped With:

FANUC 0i-TD (With Manual Guide i)
24″ 3 Jaw Manual Chuck (10″ Bore)
Chip Conveyor
Steady Rest

Still Running in plant

www.fmtcompanyinc.com

This machine is listed for sale by Frost Machine Tool, Inc. located in Hubbard, Texas