ACRA MODEL 5VL HEAVY DUTY BED TYPE VERTICAL BORING & MILLING MACHINE |
|
| Stock Code: |
15411 |
| Price: | $RFQ |
| Subcategory: | Centering & Cut-Off Millers |
| Manufacturer: |
Acra |
| Model: |
5VL |
| Condition: | New |
<p class="MsoNormal"><strong>ACRA MODEL 5VL HEAVY DUTY BED TYPE VERTICAL BORING & MILLING MACHINE</strong></p>
<p>• Full Geared Drive Spindle with 2-ranges variable speed, powerful and easy operating<br />• Table Feeding System equipped with precision ball screws and powerful servo motor ensure the table movement smoothly.<br />• The X, Y, & Z Axis equipped with pneumatic clamp device.<br />• The X-Axis could be extended up to 2500 mm with 2 sub-slide way on request.<br /><br />Table & Saddle:<br />• The Table and Saddle are made of high-quality cast iron which has been carefully stress relieved.<br />• Way surfaces are hand scraped and finished<br /><br />Feed Box:<br />• Table and Saddle feed can be driven by power or manual operation, and is easy to change speeds and to operate.<br />• Because of the large range of speeds, it is simple to go from low speed heavy cutting to high speed<br />finishing cutting.<br /><br />Backlash Eliminator:<br />• Table feed system is equipped with easy adjustable backlash eliminator to increase operating stability and cutting efficiency.<br />• Large supporting surface and narrow square guide ways provide stable and smooth sliding.<br /><br />Accuracy of Table & Saddle:<br />• Table and saddle are made of high quality cast iron, treated through stress relieving.<br />• The sliding surfaces are scrapped and finished.<br />• The upper, rear and front reference surfaces are ground, T-slots are correctly machined. So that the flatness, parallelism and squareness all meet the requirements of operation and are convenient in setup the work pieces.<br /><br />Operation Device:<br />Whole structure of the machine is quite simple.<br />The operation device, such as the switch and handle, are installed in the front of the machine, so that all functional operations are at the operator’s fingertips.<br />A Counter Balancing weight is housed in the column to guarantee the smooth travel of the spindle head.<br /><br />Anti-Wear Surface:<br />• Casting by high quality case iron.<br />• Completed annealing process to release residual stress, and all sliding ways hardened and ground to reserve high accuracy and wear resistance.<br /><br /><br />Specifications:<br />Table Travel X (Longitudinal): 59”<br />Table Travel Y (Cross): 24”<br />Vertical Spindle Head Travel (Vertical): 27-1/2”<br />Vertical Spindle Nose to Tabletop: 3-15/16” ~ 31-1/2″<br />Vertical Spindle Center to Column Front: 21-5/8”<br />Table Working Area: 87” x 20″<br />T slot (Wide x No. x Pitch): 0.7” x 5 x 3-9/16”<br />Tabletop to Floor: 33-7/8”<br />Spindle Nose: ISO R297 No.50<br />Vertical Spindle Speeds: 45-1,500 Infinitely Variable<br />Z-Axis Feeds (Vertical Spindle): 0.002 ~ 0.008”/min<br />Rapid Traverse (Longitudinal & Cross): 129-7/8”/min<br />Feed Rates (Longitudinal & Cross): 0” ~ 39-3/8”/min<br />Change of Feeds: Infinitely Variable<br />Vertical Spindle: AC 20 HP<br />Feed: Servo Motors AC 2 HP-6P, X & Y-Axis: 4.7 HP<br />Lubrication: AC 3.5W-4P<br />Cutting fluid: AC 1/6 HP-2P<br />Voltage: 220V AC~3 PH<br />Weight 15000 lbs<br />Dimensions 126 × 79 × 95 in</p>
<div> </div>
<p>Standard Equipment:<br />• Coolant System.<br />• Auto Lubrication System.<br />• Draw Bar.<br />• Leveling Blocks.<br />• Automatic Table Feeds with Rapid Traverse.<br />• Tools and Toolbox.<br />• Hardened & Ground Box ways.</p>
This machine is listed for sale by Blumberg Machinery
located in Bannockburn, Illinois