buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Used > Maryland

Used Machine Tools in Maryland

50 used machine tools items for sale in Maryland
1 | 2 | 3
Refine: Viewing 1 - 20 of 50 matches
Sort by:
Items Per Page:  20  |  50 |  100
2003 MORI SEIKI NV5000A/40 DUAL PALLET
$RFQ
2003 MORI SEIKI NV5000A/40 DUAL PALLET
Very clean heavy duty machine with dual pallet APC system, this Mori Seiki NV-5000A/40 vertical machining center has 12,000 RPM and is coming out of an aerospace plant.
  • X axis: 31.5"
  • Y axis: 20"
    2016 KITAMURA MYTRUNNION-4G
    $RFQ
    2016 KITAMURA MYTRUNNION-4G
    With a built-in trunnion, this 2016 Kitamura Mytrunnion-4G is designed for high precision A-axis, C-axis, and simultaneous 5-axis machining. Machine includes Through Spindle Coolant, Renishaw Probing, and boasts 100 ATC
    2016 KITAMURA MYTRUNNION-4G
    $RFQ
    2016 KITAMURA MYTRUNNION-4G
    With a built-in trunnion, this 2016 Kitamura Mytrunnion-4G is designed for high precision A-axis, C-axis, and simultaneous 5-axis machining. Machine includes Through Spindle Coolant, Renishaw Probing, and boasts 100 ATC
    2016 KITAMURA MYTRUNNION-4G
    $RFQ
    2016 KITAMURA MYTRUNNION-4G
    With a built-in trunnion, this 2016 Kitamura Mytrunnion-4G is designed for high precision A-axis, C-axis, and simultaneous 5-axis machining. Machine includes Through Spindle Coolant, Renishaw Probing, and boasts 100 ATC
    2011 OKUMA MB-5000H
    $RFQ
    2011 OKUMA MB-5000H
    2011 OKUMA MB-5000H HMC with 15,000 RPM spindle, full 4th axis, 60 ATC, probes, and high-pressure coolant. Ready for immediate purchase.
    • X axis: 29.92"
    • Y axis: 29.92"
      SUNNEN MBB-1660D
      $RFQ
      SUNNEN MBB-1660D
      SUNNEN MBB-1660D used honing machine in good condition. Heavy/light cutting pressure adjustment, assortment of tooling.
      • Maximum diameter: 0.06"
      • Stroke: 0.06"
        2018 DOOSAN NHP 5000
        $RFQ
        2018 DOOSAN NHP 5000
        Fanuc 31i-MB Control, Full 4th Axis, Through-Spindle Coolant (1,000 PSI), MP Systems High-Pressure Coolant Unit, Renishaw Probing, 120 Tool Positions. This 2018 Doosan NHP 5000 horizontal machining center is available im
        • X axis: 28.7"
        • Y axis: 28.7"
          2006 HAAS TM-1
          $RFQ
          2006 HAAS TM-1
          Haas TM-1 with tool changer, partial enclosures and intuitive programming system. Available immediately,
          • X axis: 30"
          • Y axis: 12"
            2018 TSUGAMI M08SY-II
            $RFQ
            2018 TSUGAMI M08SY-II
            2018 TSUGAMI M08SY-II CNC Lathe: Multi-Axis, Fanuc Control, Bar Loader, Y-Axis, Sub Spindle, 12-Turret, Live Tooling. Immediate inspection & purchase. Used, specs online.
            • Centers: 15"
              2010 DOOSAN PUMA 3100ULY
              $RFQ
              2010 DOOSAN PUMA 3100ULY
              For sale: 2010 DOOSAN PUMA 3100ULY CNC Lathe. Accurate multi-axis machining with maximum cutting diameter of 16.54" and length of 123.03". Equipped with FANUC OI-TD CNC control, live tooling, Y-axis, chip conve
              • Swing: 33.46"
              • Centers: 123.03"
                2007 HAAS VF-2SS TSC
                $RFQ
                2007 HAAS VF-2SS TSC
                HAAS VF-2SS Vertical Machining Center, 2007, features a 36" x 14" table, 30" x 16" x 20" travel, 12,000 RPM spindle, 30 hp motor, 24-tool capacity. Equipped with 4th axis drive, through spindle c
                • X axis: 30"
                • Y axis: 16"
                  2006 HAAS MDC500 DUAL PALLET VMC
                  $RFQ
                  2006 HAAS MDC500 DUAL PALLET VMC
                  For sale: 2006 HAAS MDC-500 Vertical Machining Center, under 800 hours of spindle time, with pallets and 20" x 14" x 20" travel, 15,000 RPM spindle speed, 20 hp motor, and 24-tool ATC. Features include thr
                  • X axis: 20"
                  • Y axis: 14"
                    2006 HURCO VM1
                    $RFQ
                    2006 HURCO VM1
                    HURCO VM1 Vertical Machining Center, 2006, used. Table: 29" x 14", X/Y/Z Travel: 26"/14"/18", Spindle: 8,000 RPM, 10 hp, ATC: 16 tools. Equipped with ULTI POCKETS, chip auger, USB, floppy drive.
                    • X axis: 26"
                    • Y axis: 14"
                      2006 HURCO VM1
                      $RFQ
                      2006 HURCO VM1
                      HURCO VM1 Vertical Machining Center, 2006, used. Table: 29" x 14", X/Y/Z Travel: 26"/14"/18", Spindle: 8,000 RPM, 10 hp, ATC: 16 tools. Equipped with ULTI POCKETS, chip auger, USB, floppy drive.
                      • X axis: 26"
                      • Y axis: 14"
                        2018 TSUGAMI S205 & EDGE BAR FEEDER
                        $RFQ
                        2018 TSUGAMI S205 & EDGE BAR FEEDER
                        20mm, Fanuc 32iMB Control, Edge Minuteman 320 Bar Feeder, MP Systems High-Pressure Coolant Unit, Mist Collector, FireTrace, Chip Conveyor, Chucker Kit, 6,000 Cutting Hours. This 2018 Tsugami S205 CNC swiss lathe is in pl
                        • Spindle hole diameter: 0.75"
                          2016 NS MAQUINAS DM1100C DEBURRING MACHINE
                          $RFQ
                          2016 NS MAQUINAS DM1100C DEBURRING MACHINE
                          Deburring/Edge Rounding Machine, Wet Dust Collector, (2) Abrasive Cross Belts, 43" x 1.9" Working Capacity. This 2016 NS Maquinas DM1100C is available immediately.
                          • Maximum sheet width: 43.3"
                            CINCINNATI HEALD 2EF73 CNC BALL GRINDER
                            $RFQ
                            CINCINNATI HEALD 2EF73 CNC BALL GRINDER
                            Cincinnati Heald 2EF73 CNC Ball Grinder - Used internal grinder with 23" max swing over workhead guard, 16" grinding stroke, and CNC control. Features Allen Bradley PanelView Plus 1000, Marposs P3ME gauging, an
                            • Swing: 23"
                            • Stroke: 16"
                              2017 HAAS ST-40
                              $RFQ
                              2017 HAAS ST-40
                              Extra Performance Option (55 HP), 2-Speed Gearbox, 15" chuck, 4" Bar Capacity, Tailstock, Tool Presetter, Chip Conveyor, only 3,000 Spindle Hours. This 2017 Haas ST-40 CNC lathe is in plant, under power and ava
                              • Swing: 34.5"
                              • Centers: 44"
                                1997 MAKINO A55 DELTA
                                $RFQ
                                1997 MAKINO A55 DELTA
                                1997 MAKINO A55 DELTA Horizontal Machining Center. Used, well-maintained from government facility and equipped with a FANUC/MAKINO Pro 3 control, 20,000 RPM HSK spindle, through spindle coolant, extra pallet, and many ad
                                • X axis: 22"
                                • Y axis: 22"
                                  2017 OKUMA LB3000EXII MYW 800 BB
                                  $RFQ
                                  2017 OKUMA LB3000EXII MYW 800 BB
                                  Used OKUMA LB3000EXII MYW 800 BB CNC Lathe, 2017. Features swing over bed: 22.83", max cutting diameter: 13.39", Y-axis travel: +2.76"/-1.77", spindle speed: 4200 RPM. Includes IEMCA barfeed, sub spin
                                  • Swing: 22.83"
                                  • Centers: 37.4"
                                    Categories:
                                    Condition:
                                    • X Used (50)
                                    Manufacturer:
                                    Location:
                                    • X Maryland (50)
                                    Price:
                                    •  to 
                                    1 | 2 | 3