buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Machining Centers - CNC > Used > Pennsylvania

Used CNC Machining Centers in Pennsylvania

53 used cnc machining center items for sale in Pennsylvania
1 | 2
Refine: Viewing 1 - 50 of 53 matches
Sort by:
Items Per Page:  20 |  50  |  100
HARDINGE CNC VERTICAL MACHINING CENTER
$16,500
HARDINGE CNC VERTICAL MACHINING CENTER
HARDINGE CNC VERTICAL MACHIING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA … $16,500.00 HMC Stock # 23146 Machine Serial No.: NVC-703 Machine Model No.: VMC 1000II New Date: 12-24-2003 Made in Taiwan Spi
FADAL VERTICAL MACHINING CENTER
$35,000
FADAL VERTICAL MACHINING CENTER
FADAL VERTICAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA ……… $35,000.00 HMC Stock # 22192-P Machine Serial No.: Unknown Machine Model No.: VMC-6535-50 New Date: 2002 SPECIFICATIONS: Table Len
HAAS VF-6 CNC VERTICAL MACHINING CENTER
$RFQ
HAAS VF-6 CNC VERTICAL MACHINING CENTER
HAAS VF-6 CNC VERTICAL MACHINING CENTER PRICE: Loaded on Truck, Our Warehouse, York, PA ………… $ POR HMC Stock # 23058 Machine Serial No.: Unknown Machine Model No.: VF-6 New Date: Unknown Machine just purchased. Pl
NASA Producer 5-axis CNC bridge mill, Fagor 8055, 22" x 26" table
$28,000
NASA Producer 5-axis CNC bridge mill, Fagor 8055, 22" x 26" table
Here is a Nasa Producer 5-axis CNC bridge type machining center. This machine only machined gold at a jewelry manufacturer. The control is a Fagor 8055 with firmware for up to 7-axis simultaneous interpolation. It has RS
2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
$RFQ
2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
  • X axis: 27.5"
  • Y axis: 15.7"
    2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
    $RFQ
    2015 FANUC ROBODRILL α-D21iLA5 DRILL & TAP CENTER, 27.5" x 15.7&q
    TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 24,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO
    • X axis: 27.5"
    • Y axis: 15.7"
      AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
      $RFQ
      AVEREX (AKARI) HS-450i HORIZONTAL MACHINING CENTER, FANUC CONTROL
      4,574 POWER ON HOURS 929 RUN HOURS 277 CUTTING HOURS MANUFACTURED IN 2015 | INSTALLED IN 2018 SPECIFICATIONS TRAVELS X-AXIS: 25.2” Y-AXIS: 24” Z-AXIS: 26.8” SPINDLE CENTER TO PALLET TOP: 2” – 26” SPINDL
      • X axis: 25.2"
      • Y axis: 24"
        KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
        $RFQ
        KITAMURA MYCENTER-4XD#50 VMC, BOX WAYS & 4TH AXIS ROTARY TABLE, 43.3” X
        TRAVELS X-AXIS: 43.3” Y-AXIS: 24” Z-AXIS: 24” SPINDLE TAPER: #50 SPEED: 10,000 RPM MOTOR (30 MIN): 35 HP MOTOR (CONTINUOUS): 30 HP SPINDLE TORQUE (30 MIN): 488.3FT/LBS TABLE SIZE: 25.2” X 50” MAXIMUM WO
        • X axis: 43.3"
        • Y axis: 24"
          2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
          $209,500
          2016 OKUMA MB-5000H HORIZONTAL MACHINING CENTER, 19.7" Pallets
          11,964 POWER ON HOURS 3,325 OPERATING HOURS 2,204 CUTTING HOURS SPECIFICATIONS TRAVELS X-AXIS: 29.92” Y-AXIS: 29.92” Z-AXIS: 29.92” SPINDLE CENTER TO PALLET TOP: 1.97” – 31.89” SPINDLE NOSE TO PALLET CE
          • X axis: 29.92"
          • Y axis: 29.82"
            2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
            $RFQ
            2013 HAAS VF-11/50 VERTICAL MACHINING CENTER, 120" X 40" X 30&quo
            TRAVELS X-AXIS: 120" Y-AXIS: 40" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS
            • X axis: 120"
            • Y axis: 40"
              2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
              $14,500
              2000 HAAS VF-0 VERTICAL MACHINING CENTER WITH HAAS CONTROL, 20” X 16” X 20”
              TRAVELS X AXIS: 20” Y AXIS: 16” Z AXIS: 20” SPINDLE NOSE TO TABLE: 4 –24” TABLE LENGTH: 26” WIDTH: 14” MAXIMUM WEIGHT ON TABLE: 3,000 LBS T-SLOTS T-SLOTS WIDTH: .625” CENTER DIS
              • X axis: 20"
              • Y axis: 16"
                2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                $RFQ
                2000 HARDINGE MODEL VMC1000II CNC VERTICAL MACHINING CENTER, 40" X 20&
                TRAVELS X-AXIS LONGITUDINAL: 40.16" Y-AXIS CROSS: 20.08" Z-AXIS VERTICAL: 20.08" SPINDLE NOSE TO TABLE SURFACE: 6.1" TO 26.1" TABLE FRONT EDGE TO DOOR: 7.23" SPINDLE CENTER TO COLUMN:
                • X axis: 40"
                • Y axis: 20"
                  2000 HAAS MODEL VF-4 VERTICAL MACHINING CENTER, 50" X 20" X 25&qu
                  $RFQ
                  2000 HAAS MODEL VF-4 VERTICAL MACHINING CENTER, 50" X 20" X 25&qu
                  TRAVELS X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" SPINDLE NOSE TO TABLE: 4" – 29" TABLE LENGTH: 52" WIDTH: 18" MAXIMUM WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625&quo
                  • X axis: 50"
                  • Y axis: 20"
                    2001 HAAS MINI MILL VERTICAL MACHINING CENTER WITH HAAS CONTROL
                    $RFQ
                    2001 HAAS MINI MILL VERTICAL MACHINING CENTER WITH HAAS CONTROL
                    ONLY 2,000 SPINDLE ON HOURS! SPECIFICATIONS TRAVELS X-AXIS: 16" Y-AXIS: 12" Z-AXIS: 10" TABLE LENGTH (TOTAL): 36" LENGTH (WORK SURFACE): 28.75" WIDTH: 12" MAXIMUM WEIGHT ON
                    • X axis: 16"
                    • Y axis: 12"
                      2013 MA-550VB VERTICAL MACHINING CENTER, 51.58” X 22” X 22”, LOW HOURS
                      $RFQ
                      2013 MA-550VB VERTICAL MACHINING CENTER, 51.58” X 22” X 22”, LOW HOURS
                      TRAVELS X-AXIS TRAVEL: 51.58” Y-AXIS TRAVEL: 22.04” Z-AXIS TRAVEL: 22.04” TABLE TO SPINDLE NOSE: 7.87” – 35.03” COLUMN FRONT TO TABLE CENTER: 12.99” – 35.03” TABLE TABLE SIZE: 51.18” X 22.04” FLOOR TO TABL
                      • X axis: 51.58"
                      • Y axis: 22.04"
                        1996 MATSUURA RA-IIIF VMC with APC, Yasnac Control, 31” X 17” X 19”
                        $RFQ
                        1996 MATSUURA RA-IIIF VMC with APC, Yasnac Control, 31” X 17” X 19”
                        MOVEMENT & RANGES X-AXIS TRAVEL: 31.49" Y-AXIS TRAVEL: 17.32” Z-AXIS TRAVEL: 19.09" FROM PALLET SURFACE TO SPINDLE END: 5.9" – 25" FROM PALLET CENTER TO COLUMN GUIDEWAY: 9.84" - 27.16&qu
                        • X axis: 31"
                        • Y axis: 17"
                          2014 DOOSAN DNM-400II VMC, FANUC OiMD, 30" x 17" x 20" TRAV
                          $RFQ
                          2014 DOOSAN DNM-400II VMC, FANUC OiMD, 30" x 17" x 20" TRAV
                          TRAVELS X-AXIS TRAVEL: 30” Y-AXIS TRAVEL: 17.1” Z-AXIS TRAVEL: 20.1” SPINDLE CENTER TO TABLE TOP: 5.9” – 30.5” SPINDLE NOSE TO COLUMN: 20.2” FEED RATES RAPIDS (X/Y): 1,417 IPM RAPIDS (Z): 1,181 IPM CUTTI
                          • X axis: 30"
                          • Y axis: 17"
                            2010 HAAS VF-10/40 VERTICAL MACHINING CENTER, 120" x 32" x 30
                            $RFQ
                            2010 HAAS VF-10/40 VERTICAL MACHINING CENTER, 120" x 32" x 30
                            TRAVELS X-AXIS: 120" Y-AXIS: 32" Z-AXIS: 30" SPINDLE NOSE TO TABLE: 5 – 35" TABLE LENGTH: 120" WIDTH: 28" MAX. WEIGHT ON TABLE: 4,000 LBS
                            • X axis: 120"
                            • Y axis: 34"
                              2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis
                              $RFQ
                              2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis
                              TRAVELS X-AXIS: 19.7" Y-AXIS: 15.74" Z-AXIS: 20.87" TABLE TABLE SIZE: 25.6" X 15.7" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: BT-30 MOTOR: 18.7 HP
                              • X axis: 19.7"
                              • Y axis: 15.74"
                                2016 MILLTRONICS VM2515 VMC WITH MILLTRONICS CONTROL, 25” X 15” X 20”
                                $RFQ
                                2016 MILLTRONICS VM2515 VMC WITH MILLTRONICS CONTROL, 25” X 15” X 20”
                                CAPACITIES TABLE: 30” X 16” X-AXIS TRAVEL: 25” Y-AXIS TRAVEL: 15” Z-AXIS TRAVEL: 20” TABLE LOAD: 1,500 LBS T-SLOT SIZE: .71” SPINDLE SPINDLE TAPER: BIG PLUS – IS NO. 40 SPINDLE NOSE TO TABLE TOP: 4 – 24” COL
                                • X axis: 25"
                                • Y axis: 15"
                                  2006 FADAL MODEL VMC6535HT VMC WITH FANUC CONTROL, 65” x 35” x 34”
                                  $RFQ
                                  2006 FADAL MODEL VMC6535HT VMC WITH FANUC CONTROL, 65” x 35” x 34”
                                  TABLE TABLE SIZE: 74.8” X 26.5” FLOOR TO TABLE SURFACE: 40.3” T-SLOTS (NO. X WIDTH X SPAN): 5 X .709" X 4.92" MAXIMUM WEIGHT ON TABLE: 4,250 LBS FEED RATES CUTTING FEED RATE (X/Y/Z): .01 – 400 IPM (600
                                  • X axis: 65"
                                  • Y axis: 35"
                                    2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis
                                    $RFQ
                                    2015 FANUC ROBODRILL α-D21MiA5 CNC Drill/Tap Center, 4th Axis
                                    TRAVELS X-AXIS: 19.7" Y-AXIS: 15.74" Z-AXIS: 20.87" TABLE TABLE SIZE: 25.6" X 15.7" LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: BT-30 MOTOR: 18.7 HP
                                    • X axis: 19.7"
                                    • Y axis: 15.74"
                                      2015 FANUC ROBODRILL α-D21iLA5 CNC DRILL/TAP CENTER., 27.5" X 15.7&quo
                                      $RFQ
                                      2015 FANUC ROBODRILL α-D21iLA5 CNC DRILL/TAP CENTER., 27.5" X 15.7&quo
                                      TRAVELS X-AXIS: 27.55″ Y-AXIS: 15.74″ Z-AXIS: 12.99″ TABLE TABLE SIZE: 33.46″ X 16.4″ LOAD CAPACITY: 660 LBS SPINDLE SPINDLE SPEED: 10,000 RPM SPINDLE TAPER: BT-30 SPINDLE NOSE TO TABLE TOP: 4.53” – 17.53” MOT
                                      • X axis: 27.5"
                                      • Y axis: 15.7"
                                        2014 FANUC ROBODRILL α-D21iLA5 CNC DRILL/TAP CENTER., 27.5" X 15.7&quo
                                        $RFQ
                                        2014 FANUC ROBODRILL α-D21iLA5 CNC DRILL/TAP CENTER., 27.5" X 15.7&quo
                                        POWER ON HOURS – 5,241 RUNNING HOURS – 3,495 CUTTING HOURS - 794 SPECIFICATIONS TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACIT
                                        • X axis: 27.5"
                                        • Y axis: 15.7"
                                          2014 FANUC ROBODRILL α-D21iLA5 CNC DRILL/TAP CENTER., 27.5" X 15.7&quo
                                          $RFQ
                                          2014 FANUC ROBODRILL α-D21iLA5 CNC DRILL/TAP CENTER., 27.5" X 15.7&quo
                                          POWER ON HOURS – 5,241 RUNNING HOURS – 3,495 CUTTING HOURS - 794 SPECIFICATIONS TRAVELS X-AXIS: 27.55" Y-AXIS: 15.74" Z-AXIS: 12.99" TABLE TABLE SIZE: 33.46" X 16.4" LOAD CAPACIT
                                          • X axis: 27.5"
                                          • Y axis: 15.7"
                                            2014 Mori Seiki Duravertical 5100 VMC, 4th Axis Rotary, 41” X 20.9” x 20&qu
                                            $RFQ
                                            2014 Mori Seiki Duravertical 5100 VMC, 4th Axis Rotary, 41” X 20.9” x 20&qu
                                            TABLE SIZE: 53.1” X 23.6” MAXIMUM WORKPIECE WEIGHT: 2,200 LBS TRAVELS X-AXIS: 41.3” Y-AXIS: 20.9” Z-AXIS: 20.1” FEED RATES X-AXIS: 1,417 IPM Y-AXIS: 1,417 IPM Z-AXIS: 786 IPM SPINDLE TAPER: CAT-40 SPE
                                            • X axis: 41"
                                            • Y axis: 20.9"
                                              2000 HAAS MODEL VF-0 VERTICAL MACHINING CENTER, 20” X 16” x 20"
                                              $RFQ
                                              2000 HAAS MODEL VF-0 VERTICAL MACHINING CENTER, 20” X 16” x 20"
                                              TRAVELS X AXIS: 20” Y AXIS: 16” Z AXIS: 20” SPINDLE NOSE TO TABLE: 4 –24” TABLE LENGTH: 26” WIDTH: 14” MAXIMUM WEIGHT ON TABLE: 3,000 LBS T-SLOTS T-SLOTS WIDTH: .625” CENTER DIS
                                              • X axis: 20"
                                              • Y axis: 16"
                                                1998 OKUMA MC-V4020 VERTICAL MACHINING CENTER, 40" X 20" X 17&quo
                                                $RFQ
                                                1998 OKUMA MC-V4020 VERTICAL MACHINING CENTER, 40" X 20" X 17&quo
                                                TRAVEL X-AXIS: 40” Y-AXIS: 20” Z-AXIS: 17.72” SPINDLE END TO TABLE SURFACE: 6.3” – 24.02” TABLE SIZE: 48” X 20” LOAD CAPACITY: 1,500 LBS SPINDLE TAPER: CAT #40 MOTOR: 15 HP SPEED RANGE: 50 – 8,000 RPM F
                                                • X axis: 40"
                                                • Y axis: 20"
                                                  2008 SHARP SV-8045A BRIDGE TYPE VERTICAL MACHINING CENTER, 80" x 45&am
                                                  $RFQ
                                                  2008 SHARP SV-8045A BRIDGE TYPE VERTICAL MACHINING CENTER, 80" x 45&am
                                                  SPECIFICATIONS CAPACITY TRAVELS: 80” X 45” X 30” TABLE SIZE: 86.6” X 39.4 MAXIMUM TABLE LOAD: 6,600 LBS THROAT DISTANCE: 47” SPINDLE NOSE TO TABLE SURFACE: 7.9” – 37.8” SPINDLE SPINDLE TAP
                                                  1998 Haas VF-4APC Vertical Machining Center with Pallets, 50" X 20&quo
                                                  $RFQ
                                                  1998 Haas VF-4APC Vertical Machining Center with Pallets, 50" X 20&quo
                                                  TRAVELS X-AXIS: 50" Y-AXIS: 20" Z-AXIS: 25" SPINDLE NOSE TO TABLE: 4" – 29" TABLE LENGTH: 52" WIDTH: 18" MAXIMUM WEIGHT ON TABLE: 3,500 LBS T-SLOTS T-SLOTS WIDTH: .625&quo
                                                  • X axis: 50"
                                                  • Y axis: 20"
                                                    MAKINO S33-APC VMC with APC, Professional 3 Control, 25.6" x 19.7"
                                                    $RFQ
                                                    MAKINO S33-APC VMC with APC, Professional 3 Control, 25.6" x 19.7"
                                                    SPECIFICATIONS TABLE SIZE: 23.6” X 15.7” MACHINING CUBE: 23.6” X 15.7” X 16.5” TABLE LOAD: 880 LBS X-AXIS TRAVEL: 25.6" Y-AXIS TRAVEL: 19.7" Z-AXIS TRAVEL: 17.7" SPINDLE TAPER: CT-40 SPINDLE: 13
                                                    • X axis: 25.6"
                                                    • Y axis: 19.7"
                                                      FADAL MODEL VMC2216HT VMC, 22" x 16" x 20", Excellent Condit
                                                      $RFQ
                                                      FADAL MODEL VMC2216HT VMC, 22" x 16" x 20", Excellent Condit
                                                      SPECIFICATIONS TABLE SIZE: 39" X 16" FLOOR TO TABLE SURFACE: 30" T-SLOTS (NO. X WIDTH X SPAN): 3" X .562" X 4.33" CUTTING FEED RATE (X/Y/Z): .01 - 250 IPM RAPID TRAVEL RATE (X/Y/Z):
                                                      • X axis: 22"
                                                      • Y axis: 16"
                                                        1997 Okuma Cadet Mate VMC, 40" x 20" x 20", OSP700M Control
                                                        $RFQ
                                                        1997 Okuma Cadet Mate VMC, 40" x 20" x 20", OSP700M Control
                                                        TRAVEL X-AXIS (TABLE): 40” Y-AXIS (SADDLE): 20” Z-AXIS (SPINDLE HEAD): 20” SPINDLE END TO TABLE SURFACE: 7.8” – 27.8” SPINDLE CENTER TO COLUMN FRONT SURFACE: 20” TABLE SIZE: 47.24” X 20.08” EFFECTIVE SIZE: 40”
                                                        • X axis: 40"
                                                        • Y axis: 20"
                                                          Ingersoll / Waldrich 5-Sided Machining Center
                                                          $RFQ
                                                          Ingersoll / Waldrich 5-Sided Machining Center
                                                          Category Machining Center, Bridge Type, Vertical Manufacturer Ingersoll / Waldrich Model 5-Sided Machining Center Year 1986 Control Customer choice of existing or new CNC X – Table Travel 252.00in, 6400.80 mm Y – S
                                                          1997 Leadwell MV-610 VMC, Fanuc OM Control, 24" x 16" x 20"
                                                          $RFQ
                                                          1997 Leadwell MV-610 VMC, Fanuc OM Control, 24" x 16" x 20"
                                                          SPECIFICATIONS TABLE TABLE SIZE: 30.3” X 15.7” WORKING AREA: 35” X 19.7” MAXIMUM LOAD CAPACITY: 880 LBS TRAVELS X-AXIS: 24" Y-AXIS: 16.1" Z-AXIS: 20" SPINDLE NOSE TO TABLE: 5.1” – 25.2” SPIN
                                                          • X axis: 24"
                                                          • Y axis: 16"
                                                            Enshu SS400 (Special Version) Machining Vertical Center
                                                            $RFQ
                                                            Enshu SS400 (Special Version) Machining Vertical Center
                                                            Category Machining Centers - Vertical Manufacturer Enshu Model SS400 (Special Version) Serial Number OOC019 Year 2001 Control Fanuc 18M X - Travel 26 in 660.4 mm Y - Travel 18 in 457.2 mm Z - Travel 20 in 508 mm
                                                            INGERSOLL BRIDGE MILL
                                                            $RFQ
                                                            INGERSOLL BRIDGE MILL
                                                            Category Machining Center, Bridge Type, Vertical Manufacturer Ingersoll / Waldrich Model 5-Sided Machining Center Year 1986 Control Customer choice of existing or new CNC X – Table Travel 252.00in, 6400.80 mm Y – S
                                                            BROTHER MODEL TC228 CNC TAPPING CENTER
                                                            $RFQ
                                                            BROTHER MODEL TC228 CNC TAPPING CENTER
                                                            Category Machining Centers – Vertical 3-Axis CNC Tapping Center Manufacturer Brother Model TC-228 Serial Number 111316 Control Brother CNC Control X - Travel 16.5 in 419.10 mm Y - Travel 11.8 in 299.72 mm Z - Trav
                                                            BROTHER MODEL TC-R2A TAPPING CENTER
                                                            $RFQ
                                                            BROTHER MODEL TC-R2A TAPPING CENTER
                                                            Category Machining Centers – Vertical 3-Axis CNC Tapping Center Manufacturer Brother Model TC-R2A Serial Number 111355 Year 2003 Control Brother CNC Control X - Travel 16.54 in 420 mm Y - Travel 12.60 in 320 mm Z
                                                            GIDDINGS & LEWIS VERTICAL MACHINING CENTER
                                                            $RFQ
                                                            GIDDINGS & LEWIS VERTICAL MACHINING CENTER
                                                            Category Machining Centers - Vertical Manufacturer Giddings & Lewis Model 924-25VSP Serial Number 924-0024-87 Year 1987 / 1990 Control Numeripath 8000-N CNC X - Travel 50.00 in 1270 mm Y - Travel 52.00 in 1320
                                                            1999 DAEWOO DMV-500 VMC, MITSUBISHI MELDAS 64 CONTROL, 40.2" X 19.7&qu
                                                            $RFQ
                                                            1999 DAEWOO DMV-500 VMC, MITSUBISHI MELDAS 64 CONTROL, 40.2" X 19.7&qu
                                                            SPECIFICATIONS TABLE SIZE: 47.2" X 19.7" X-AXIS TRAVEL: 40.2" Y-AXIS TRAVEL: 19.7" Z-AXIS TRAVEL: 20.1” SPINDLE TAPER: 40 SPINDLE DRIVE MOTOR (30 MIN/CONT.): 20/15 HP MAXIMUM SPINDLE SPEED: 8
                                                            • X axis: 40.2"
                                                            • Y axis: 19.7"
                                                              1997 DAEWOO ACE 50 VMC, MITSUBISHI MELDAS 64 CONTROL, 40” X 20” X 20”
                                                              $RFQ
                                                              1997 DAEWOO ACE 50 VMC, MITSUBISHI MELDAS 64 CONTROL, 40” X 20” X 20”
                                                              SPECIFICATIONS TABLE SIZE: 47.2" X 19.7" MAXIMUM TABLE LOAD: 1,760 LBS SPINDLE NOSE TO TABLE TOP: 5.9” – 26” (EVENLY DISTRIBUTED) X-AXIS TRAVEL: 40” Y-AXIS TRAVEL: 20” Z-AXIS TRAVEL: 20” RAPID TRAVERS
                                                              • X axis: 40"
                                                              • Y axis: 20"
                                                                Ingersoll 5-Sided Machining Center
                                                                $RFQ
                                                                Ingersoll 5-Sided Machining Center
                                                                Category Machining Center, Bridge Type, Vertical Manufacturer Ingersoll / Waldrich Model 5-Sided Machining Center Year 1986 / 2010 Control New Siemens 840 CNC X – Table Travel 252.00in, 6400.80 mm Y – Saddle
                                                                Giddings & Lewis 924-25VSP
                                                                $RFQ
                                                                Giddings & Lewis 924-25VSP
                                                                Category Machining Centers - Vertical Manufacturer Giddings & Lewis Model 924-25VSP Serial Number 924-0024-87 Year 1987 / 1990 Control Numeripath 8000-N CNC X - Travel 50.00 in 1270 mm Y - Travel 52
                                                                Giddings & Lewis 987-15HS Traveling Column
                                                                $RFQ
                                                                Giddings & Lewis 987-15HS Traveling Column
                                                                Category Machining Centers - Horizontal Manufacturer Giddings & Lewis Model 987-15HS Traveling Column Year 1982 Control Existing G & L 800 X – Horizontal Cross Travel 72.00 in 1828.8 mm Y – Vertica
                                                                Enshu SS400 Vertical Machining Center
                                                                $RFQ
                                                                Enshu SS400 Vertical Machining Center
                                                                Category Machining Centers - Vertical Manufacturer Enshu Model SS400 (Special Version) Serial Number OOC019 Year 2001 Control Fanuc 18M X - Travel 26 in 660.4 mm Y - Travel 18 in 457.2 mm Z - Travel
                                                                HURCO BMC 30 Vertical Machining Center
                                                                $RFQ
                                                                HURCO BMC 30 Vertical Machining Center
                                                                THIS MACHINE IS IN GOOD RUNNING CONDITION. IT WAS TRADED IN ON A NEWER MACHINE. THIS MACHINE WAS TAKEN OUT OF SERVICE IN 2008 AND JUST RECENTLY INSTALLED. IT IS UNDER POWER AND AVAILABLE FOR INSPECTION. Specs X: 30
                                                                • X axis: 30"
                                                                • Y axis: 20"
                                                                  HAAS VF-4 Vertical Machining Center
                                                                  $RFQ
                                                                  HAAS VF-4 Vertical Machining Center
                                                                  Specs X: 50 " Y: 20 " Z: 25 " Power: 20 hp RPM: 7500 rpm # ATC: 20 Table-W: 18 " Table-L: 52 " Taper: CAT-40 Control: HAAS Good running machine. Rough paint but new Vect
                                                                  • X axis: 50"
                                                                  • Y axis: 20"
                                                                    DAEWOO DMV-400 Vertical Machining Centers
                                                                    $RFQ
                                                                    DAEWOO DMV-400 Vertical Machining Centers
                                                                    22" x 15.7" x 22.4" travels, Two pallets, 10,000 rpm, 30 position side mount ATC, 40 taper Fanuc 18-M control. Specs X: 22 " Y: 15.7 " Z: 22.4 " Power: 15 hp RPM: 10000 rpm # A
                                                                    • X axis: 22"
                                                                    • Y axis: 15.7"
                                                                      2001 DAEWOO MYNX 500 CNC 4-AXIS VMC WITH FANUC 21M, 40" X 20" X 2
                                                                      $RFQ
                                                                      2001 DAEWOO MYNX 500 CNC 4-AXIS VMC WITH FANUC 21M, 40" X 20" X 2
                                                                      SPECIFICATIONS TABLE SIZE: 39" X 17" SPINDLE NOSE TO TABLE TOP: 4" - 29" X-AXIS TRAVEL: 40" Y-AXIS TRAVEL:
                                                                      • X axis: 40"
                                                                      • Y axis: 22"
                                                                        Related Subcategories:
                                                                        Categories:
                                                                        Condition:
                                                                        • X Used (53)
                                                                        Manufacturer:
                                                                        Location:
                                                                        • X Pennsylvania (53)
                                                                        Price:
                                                                        •  to 
                                                                        1 | 2