buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Lathes & Turning Centers > Used > Doosan

Used Doosan Lathes & Turning Centers

35 used Doosan lathe or turning center items for sale
1 | 2
Refine: Viewing 1 - 20 of 35 matches
Sort by:
Items Per Page:  20  |  50 |  100
DOOSAN PUMA 240B CNC LATHE NEW: 2012 |AG 86105
SPECS: CHUCK SIZE: 10" MAX DIAMETER BAR CAPACITY: 2.75" MAX SWING OVER BED / CARRIAGE: 21.7" / 15.4" TURNING DIAMETER (MAX / STD): 13.8" / 8.3" DISTANCE BETWEEN CENTERS
  • Swing: 21.7"
  • Centers: 26.3"
    DOOSAN LYNX 220LSYC CNC LATHE NEW: 2016 | AG 86052
    SPECS: CAPACITY- SWING OVER BED: 23.6" SWING OVER SADDLE: 15.7" MAX. TURNING DIAMETER: 11.8" MAX. TURNING LENGTH: 20.1" CHUCK SIZE INCH: 8" BAR WORKING DIAMETER 2.6" TRAVELS- TR
    • Swing: 23.6"
      DOOSAN PUMA 200C CNC LATHE
      FANUC 18T, 4500 RPM, 20 HP, CHIP CONVEYOR
      • Swing: 20"
      • Centers: 22"
        DOOSAN V450 VERTICAL TURRET LATHE NEW: 2006 | MM 85955
        SPECS: CHUCK SIZE 15 CONTROL FANUC 21ITB RAPID TRAVERSE (X/Z) 787 SPINDLE DIAMETER 3.5 SPINDLE MOTOR CONT. 30 SPINDLE NOSE A2-8 SPINDLE SPEED 2500 SWING 22.83 TABLE SIZE 10 TO 12 TRAVEL (X) 9.45 TRAVEL (Z) 17.
        • Swing: 22.83"
          DOOSAN PUMA TT1800SY CNC LATHE NEW: 2017 | IH
          Specifications: TRAVELS -X AXIS: 6.5” -X2 AXIS: 7.5” -Y AXIS: 3.9” -Z AXIS: 27.6” -Z2 AXIS: 28.3” -B AXIS (SUB SPINDLE): 30.3” -C1/C2 AXIS INDEX: 0.001DEG RAPID TRAVERSE RATES(X/Y/Z): 787/295/787 IPM # AXIS :
          • Swing: 9.1"
          • Centers: 27.6"
            DOOSAN LYNX 2100LSY CNC LATHE NEW: 2022 | LR
            Specifications: TRAVELS -X AXIS: 8.1" -Z AXIS: 22" -B AXIS: 22" -Y AXIS: 4.1" +/- 2.1" X AXIS TRAVERSE RATE: 1181 IPM Y AXIS RAPID TRAVERSE RATE: 394 IPM # AXIS: 4 SWING: 8" TURN
            • Swing: 8"
            • Centers: 20"
              2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control
              2007 Doosan Model TL-2000 (4 Axis) CNC Lathe Fanuc 18i-TB Control Specifications Maximum Swing Over Bed 21.75" Maximum Turning Diameter (Upper Turret) 14.6” Maximum Turning Diameter (Lower Turret)
              • Swing: 21.75"
              • Centers: 24.8"
                2021 DOOSAN LYNX 2100LSYB
                SWING OVER BED............. 23.6" MAX CUTTING DIAMETER....... 11.8" MAX CUTTING LENGTH......... 20.1" X-AXIS TRAVEL.............. 8.1" Y-AXIS TRAVEL.............. 4.1" Z-AXIS TRAVEL.........
                • Swing: 23.6"
                  Doosan SMX 3100ST CNC LATHE
                  DOOSAN Model:PUMA SMX3100ST CNC TURNING CENTER Manufactured: 2018 Specifications Main Spindle Chuck          Collet Maximum Swing      
                  35" Swing 120" Centers Doosan Puma 480 XL CNC LATHE, Fanuc 32iA, 24"chk. St
                  DOOSAN PUMA 480XL CNC TURNING CENTER Year: 2009   SPECIFICATIONS: SWING OVER BED ..................... 35.4" SWING OVER SADDLE .................. 28.3" MAX. TURNING DIAMETER .............. 25.6"
                  2020 DOOSAN PUMA TT1800SY
                  SWING OVER BED.......... 9.05" MAX CUTTING DIAMETER.... 9.05" DISTANCE BETWEEN CENTER. 38.5" Y-AXIS TRAVEL........... 3.93" BAR CAPACITY............ 2.625" SPINDLE NOSE............ A2-6 SPI
                  • Swing: 9.05"
                  • Centers: 38.5"
                    DOOSAN PUMA 400MB CNC TURN MILL 18″ CHUCK 5.2″ BORE C AXIS LIVE TOOL LATHE
                    SKU# 2062 Make: Doosan Model No.: PUMA 400MB Serial # P35M2325 Year: 2006/2007 Cutting Time: 5049 Hours Condition: Very Good All specifications are approximations, and are subject to verification. Equipped Wi
                    • Swing: 30.3"
                    • Centers: 42"
                      2010 Doosan Lynx 220LMA
                      Max Diameter Bar Capacity...................... 2" Max Swing Over Bed / Carriage............... 23.2" / 6.7" Max Turning Diameter (Max / Std)........... 9.84" / 6.7" Max Machining Length
                      • Swing: 945"
                      • Centers: 948"
                        DOOSAN LYNX 220 C CNC Lathe
                        W/ CNC control FANUC O-ITC, collet chuck, hinge chip conveyor, manual tailstock, operation via foot switch, automatic tool measurement, short bar loading magazine LNS QUICKLOAD SERVO 65, additional 3-jaw chuck diameter 2
                        • Swing: 20.08"
                          DOOSAN PUMA 300 B CNC Lathe
                          DOOSAN PUMA 300 B CNC Lathe Year: 2007 With FANUC SERIES 21i-TB CNC control system Equipped with: - three-jaw chuck - one tailstock - tools, which are mounted on tool turret Nominal power: 40,01 kVA Max. load:
                          2019 Doosan Puma 700L CNC Turning Center
                          Specifications: Control ............................................................................................. Fanuc 32i-B Series Max Swing Over Bed ..............................................................
                          • Swing: 39.3"
                          • Centers: 126"
                            DOOSAN PUMA 300C CNC TURNING CENTER
                            SKU # 2109 Make: Doosan Model No.: PUMA 300C Serial # PM303287 Year: 2009/2011 Cutting Time: 5490 Hours Condition: Very Good All specifications are approximations, and are subject to verification. Doosan Puma
                            • Swing: 22.4"
                            • Centers: 32"
                              DOOSAN PUMA 480L CNC LATHE
                              No description providedCNC Controlyes Type of CNC ControlFanuc 32i Chuck Size32 inchesSwing35.4 inchesTurning Diameter25.6 inchesCenter Distance80.4 inchesBar Capacity6.5 inchesSpindle Bore7.1 inchesX Axis Travel14.3 inc
                              DOOSAN PUMA 4100B,15"HYD-CHUCK,31.1"SWING,44"CC,2,000-RPM,5.
                              DOOSAN PUMA 4100B CNC TURNING CENTER NEW: 4/2019 Specifications: SWING OVER BED ................................... 31.1" SWING OVER SADDLE ................................ 23.2" MAX. TURNING DIAMETER ..
                              • Swing: 33"
                              • Centers: 40"
                                DOOSAN PUMA 5100LB,21"CHUCK,35"SWING,84"CENTERS,7"BORE,
                                DOOSAN PUMA-5100LB CNC TURNING CENTER NEW: 2017 Specifications: SWING OVER BED ............................ 35.4" SWING OVER SADDLE ......................... 27.2" MAX. TURNING DIAMETER .................
                                • Swing: 35"
                                • Centers: 86"
                                  Related Subcategories:
                                  Condition:
                                  • X Used (35)
                                  Manufacturer:
                                  • X Doosan (35)
                                  Price:
                                  •  to 
                                  1 | 2