buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Dake > Illinois

Dake Machine Tools in Illinois

20 new & used Dake machine tools items for sale in Illinois
1
Refine: Viewing 1 - 20 of 20 matches
Sort by:
Items Per Page:  20  |  50 |  100
75 TON DAKE HAND OPERATED HYDRAULIC SHOP PRESS ( H-FRAME ), MODEL 75H
$RFQ
75 TON DAKE HAND OPERATED HYDRAULIC SHOP PRESS ( H-FRAME ), MODEL 75H
75 TON DAKE HAND OPERATED HYDRAULIC SHOP PRESS ( H-FRAME ) MODEL 75H S/N 180967 CAPACITY ----------------------------------------- 75 TONS WIDTH BETWEEN UPRIGHTS -----------
  • Tonnage: 75T
    75 TON DAKE HAND OPERATED HYDRAULIC SHOP PRESS ( WIDE H-FRAME )
    $RFQ
    75 TON DAKE HAND OPERATED HYDRAULIC SHOP PRESS ( WIDE H-FRAME )
    75 TON DAKE HAND OPERATED HYDRAULIC SHOP PRESS ( WIDE H-FRAME ) MODEL 75HW RACO Stock Number R018408 CAPACITY ---------------------------------------- 75 TONS WIDTH BETWEEN UPRIGHTS -------------------- 90" W
    • Tonnage: 75T
      DAKE Power Hammer Machine
      $RFQ
      DAKE Power Hammer Machine
      • Motor: 1 HP, 120 volts, 1 phase • 16 gauge (.06") steel capacity • 11 gauge (.12") aluminum capacity • 900 strokes per minute • 18 inch throat • 7 inch maximum opening with adjustable bottom die holder
      DAKE Pneumatic BENCH PRESSES - made in USA
      $RFQ
      DAKE Pneumatic BENCH PRESSES - made in USA
      • Non-rotating double acting ram eliminates the need for guide pins on most tooling • Chrome-plated piston rod resists rust and ensures long life • Threaded rod end permits nose piece and tooling to be easily attached
      DAKE Compound Leverage ARBOR PRESSES - made in USA
      $RFQ
      DAKE Compound Leverage ARBOR PRESSES - made in USA
      • Compound Leverage Mechanism means less effort for you. • Sliding Pin changes press from compound to single leverage. • Ratchet allows lever to be used in most convenient position. • Handwheel advances ram to work qu
      DAKE Ratcheting ARBOR PRESSES - made in USA
      $RFQ
      DAKE Ratcheting ARBOR PRESSES - made in USA
      • Ratchet allows lever to be used in most convenient position. • Handwheel advances ram to work quickly. • Counterweight returns lever quickly after downstroke. • Pedestals available on 1-1/2, 1-1/2B, and 3A models.
      DAKE ARBOR PRESSES - made in USA
      $RFQ
      DAKE ARBOR PRESSES - made in USA
      DAKE ARBOR PRESSES - made in USA
      DAKE C-FRAME HYDRAULIC PRESS
      $RFQ
      DAKE C-FRAME HYDRAULIC PRESS
      Standard Equipment: • Adjustable Return Stroke • Remote Pressure Adjustment • Light Sensitive Thumb Pads • Run-Jog Selector • Oversized Heavy duty Hydraulic Cylinders • Bolster Plate included • Choose 208, 230, 46
      DAKE HYDRAULIC DURA-PRESS
      $RFQ
      DAKE HYDRAULIC DURA-PRESS
      • Double acting cylinder design with 5 part oil seals for smooth operation and a tight seal. • Ram has lifting eyes to move table with chains. • 2 Hp submerged motor drives 2 centrifugal pumps on 40 & 70 Ton • 3 H
      DAKE 50 Ton HYDRAULIC DURA-PRESS
      $RFQ
      DAKE 50 Ton HYDRAULIC DURA-PRESS
      • Regular Price: Only $6195. Made in USA. • Motor is 2 hp, 110 volts to plug in anywhere • Lever control ram advance for easy use. • Double acting cylinder for easy positioning of the ram. • Sturdy, welded channel
      • Tonnage: 50T
        DAKE HYDRAULIC DURA-PRESS
        $RFQ
        DAKE HYDRAULIC DURA-PRESS
        • Simple single acting cylinder design with 5 part oil seals for smooth operation and a tight seal. • Welded heavy steel plate frame for greater rigidity. • Efficient hand pump, conveniently located reduces operator fa
        DAKE H-FRAME HYDRAULIC PRESS
        $RFQ
        DAKE H-FRAME HYDRAULIC PRESS
        Standard Features: • Hand Pump or Air or Electric • Rapid Ram Return • By-pass Hole • Adjustable Table with self locking hoist • Rapid Screw Traverse of Ram • Movable Workload (except 25 ton) • 2 Forged Steel V-Bl
        DAKE Euromatic semi and fully automatic Cold Saws
        $RFQ
        DAKE Euromatic semi and fully automatic Cold Saws
        • Head rotates up to 45° right for miter cutting. • Head rotates up to 90° left for slot cutting. • Table has removeable surface wear plates. • Mesh discharge chute for short lengths. • Cutting head has 3 g
        Dake Technics 350SA Semi-Automatic Cold Saw/ 350A Automatic Cold Saw
        $RFQ
        Dake Technics 350SA Semi-Automatic Cold Saw/ 350A Automatic Cold Saw
        Cutting Capacity @90°: 3 3/8 round solid, 4 3/4 round tube,4 1/8 sq.tube 6 1/4 x 3 1/2 rectangle tube @45°: 3 " round solid, 4" round tube, 3 3/8 sq.tube 3 3/8 x 2 3/4 rectangle tube Fe
        • Blade diameter: 14"
          DAKE circular cold saws- Metal
          $RFQ
          DAKE circular cold saws- Metal
          Dake Super Cut Circular Coldsaw machine Metal Cutting Capacity @90°: 1 1/4 round solid, 2 3/4 round tube,2 1/2 sq.tube 3 7/8 x 1 3/4 rectangle tube @45°: 1" round solid, 2 3/8 round tube,2 1/8
          Dake Work-A-Matic SXC Vertical Band Saw
          $RFQ
          Dake Work-A-Matic SXC Vertical Band Saw
          Automatic gravity feed allows hand free operation. Hydraulic feed regulator to cut almost any metal. 1 or 3 phase electrics. C-clamp assembly. Made in USA. Blade Speeds Fpm- 70 140 270 540 Motor HP-
          • Throat capacity: 9"
          • Height capacity: 14.5"
            Dake Trademaster
            $RFQ
            Dake Trademaster
            Adjustable blade feed pressure. Work light. Extra Heavy Duty. Made in USA. Optional 1" capacity Blade Welder Blade Motor Throat Max Table Max Speed HP Depth Work S
            • Throat capacity: 19.5"
            • Height capacity: 12"
              Dake model 14-10 Made in USA.
              $RFQ
              Dake model 14-10 Made in USA.
              Blade Speeds Motor Throat Max Table Max fpm HP Depth Work Size Table Height Tilts 70 1 14" 10" 15" 5° Left 140
              • Throat capacity: 14"
              • Height capacity: 10"
                Dake TRAD-301 Swivel-head horizontal band saw Heavy Duty.
                $RFQ
                Dake TRAD-301 Swivel-head horizontal band saw Heavy Duty.
                220 volts, 3 phase. Cutting Capacity: @90°: 10" Round, 11.75 x 7" flat bar // @45°: 7.5" Round, 7.5 x 6.5" flat bar Blade speeds: 108 or 216 fpm. Blade width: 1" // Motor: 1.3 or
                Hydraulic Shop Press made in USA
                $RFQ
                Hydraulic Shop Press made in USA
                • Made in USA • Motor is 2 hp, 110 volts to plug in anywhere • Lever control ram advance for easy use. • Double acting cylinder for easy positioning of the ram. • Sturdy, welded channel iron frame weighes over 1000 L
                • Tonnage: 50T
                • Stroke: 16"
                  Categories:
                  Condition:
                  Manufacturer:
                  • X Dake (20)
                  Location:
                  • X Illinois (20)
                  Price:
                  •  to 
                  1