| Photo: |
Machine Detail: |
Manufacturer: |
Price: |
 | 14" X 48" NORTON ROLL GRINDER
SERIAL NUMBER: 21542
YEAR OF MANUFACTURE : 1942
DIAMETER ............ 14" (355mm)
LENGTH .............. 48" (1220mm)(CENTER-TO-CENTER)
| NORTON | $RFQ
Newark, NJ
United States |
 | RADIANT TUBE FIRED ROLLER HEARTH ANNEALING FURNACE
Radiant Tube Fired Roller Hearth Annealing Furnace
Capacity:
Min Length ............... 10'
Max Length ............... 45'
Min Size ........ | RADIANT | $RFQ
Newark, NJ
United States |
 | GRANCO BILLET FURNACE
NATURAL GAS FIRED
(6) BURNERS
1750 FARENHEIT DEGREES MAXIMUM TEMPERATURE
9" BILLET DIAMETER | GRANCO | $RFQ
Newark, NJ
United States |
| GRANCO BILLET FURNACE
NATURAL GAS FIRED
(6) BURNERS
1750 FARENHEIT DEGREES MAXIMUM TEMPERATURE
9" BILLET DIAMETER | GRANCO | $RFQ
Newark, NJ
United States |
 | RAD-CON BELL TYPE ANNEALING FURNACE
132" DIA X 66" HIGH
NITROGEN ATMOSPHERE
2 COVERS
2 BASES
PROGRAMMABLE TEMPERATURE CONTROLS
ELECTRONIC HEAT CONTROL SYSTEM
UNIT INC | RAD-CON | $RFQ
Newark, NJ
United States |
 | (4) 1550MM x 2500MM x 30TON GRUNEWALD HNX BELL FURNACES
Max. load: 30000kg
Max. diameter: 1850/1700 mm
Max. height: 2450 mm
Age: +/- 1975
Gas Type: natural gas for the furnace
95% N2 and 5% | GRUNEWALD | $RFQ
Newark, NJ
United States |
 | EBNER GAS-FIRED HICON/N2 BELL ANNEALER FACILITY, TYPE HOG 430/250 ST-N2-D, TO
EBNER GAS-FIRED HICON/N2 BELL ANNEALER FACILITY, TYPE HOG 430/250 ST-N2-D, TO
ANNEAL STEEL WIRE COILS IN STRAIGHT NITROGEN ATMOSPHERE
TECHNICAL | EBNER | $RFQ
Newark, NJ
United States |
 | GASMAC CAR BOTTOM BATCH TYPE ANNEALING OVEN
SERIAL No. ................... JW020469
TYPE ......................... CAR BOTTOM BATCH TYPE
CAR CAPACITY ................. 7,200# APPROX
MAX OPPE | GASMAC | $RFQ
Newark, NJ
United States |
 | 36" COE STOCK #CF-400 FEEDER
STOCK FEED
36" x 36" | COE | $RFQ
Newark, NJ
United States |
| 20" X .150" SESCO MODEL #56-95 FEEDER
COIL WEIGHT .................... 16,000#
STOCK WIDTH .................... 10" TO 20"
OUTPUT RATE .................... 15 TO 45 FPM
| SESCO | $RFQ
Newark, NJ
United States |
 | 215 TON GROTNES MODEL #15-HE-215-12 HYDRAULIC EXPANDER
Cone Angle = 6
NOMINAL DIAMETER ...................... 16"
DIAMETRAL TRAVEL ...................... 1.47"
JAW HEIGHT .............. | GROTNES | $RFQ
Newark, NJ
United States |
 | 7" WIDE 2-HI EDGING MILL
7" WIDE 2-HI EDGING MILL
CONFIGURATION - 2-HI
MAX STRIP WIDTH - 7"
THICKNESS RANGE - .020"-.125"
EDGING PASSES - 3
LINE DI | Not Specified | $RFQ
Newark, NJ
United States |
 | GAUER No. 6H20NC 20" THRU-FEED COIL STRIP EDGE DEBURRING MACHINE
WIDTH RANGE ........................ 5/8" TO 20"
THICKNESS RANGE .................... 20 GA (.0344") TO 11 GA (.125")
MATERIAL | GAUER | $RFQ
Newark, NJ
United States |
 | GAUER No. 6H20NC 20" THRU-FEED COIL STRIP EDGE DEBURRING MACHINE
WIDTH RANGE ................. 5/8" TO 20"
THICKNESS RANGE ............. 20 GA. (.0344") TO 11 GA (.125")
MATERIAL: COLD OR HOT | GAUER | $RFQ
Newark, NJ
United States |
| CARLTON #3A RADIAL DRILL, FLOOR TYPE
CAPACITY .................................. 3-1/2"
ARM ....................................... 5'
EST, O,A, DIMENSIONS .................... | CARLTON | $RFQ
Newark, NJ
United States |
 | AMERICAN 4' x 13" RADIAL DRILL
SPINDLE TRAVEL ........................ 18"
SPINDLE SPEED ......................... (36) 12 - 1500 RPM
HEAD TRAVEL ON ARM .................... | AMERICAN | $RFQ
Newark, NJ
United States |
 | DAVENPORT #10-901 SECONDARY OPERATION DRILLING AND TAPPING MACHINE
THREE UNITS MOUNTED VERTICALLY
TWO UNITS MOUNTED HORIZONTALLY ON EITHER SIDE OF INDEX TABLE.
PNEUMATICALLY POWERED,
HYDRAULICALLY CONTROLLED MECHAN | DAVENPORT | $RFQ
Newark, NJ
United States |
 | 2000mm X 20mm VIGANO CUT TO LENGTH LINE
Features of the material at entry
Material
Steel coil (pickling, hot covered, black)
Tensile strength
Thickness 20 mm max 500 N/mm2 - max | VIGANO | $RFQ
Newark, NJ
United States |
 | 60" x 16 Ga ENGEL Mdl# 5-16 CUT-TO-LENGTH LINE
MAX WIDTH OF MATERIALS ................ 60"
MAX THICK OF MATERIALS ................ 16 Ga. MS
MOTOR ................................. 30 HP AC | ENGEL | $RFQ
Newark, NJ
United States |
 | 72" X .250" 60,000# CINCINNATI/HERR VOSS CUT TO LENGTH LINE
Coil Thickness: .078" - .250"
Material Width: 24" - 72"
Weight Capacity: 60,000Lb
Coil ID: 20" - 24"
Coil OD: 72� | CINCINNATI | $RFQ
Newark, NJ
United States |
| | | | | | | | | | | | |