| Photo: |
Machine Detail: |
Manufacturer: |
Price: |
 | TORRINGTON MODEL #W-10 WIRE SPRING COILER
CAPACITY WIRE DIAMETER ............ .008" TO .028"
COIL RANGE ........................ .875" - 3 x WIRE DIA
PRODUCTION RATE ......... | TORRINGTON | $RFQ
Newark, NJ
United States |
 | TORRINGTON MODEL #W-10 WIRE SPRING COILER
WIRE DIAMETER RANGE................ .008" TO .028"
WIRE LENGTH PER SPRING............. 0" - 24"
COIL OD RANGE................... | TORRINGTON | $RFQ
Newark, NJ
United States |
 | TORRINGTON No. 125-SA SPRING COILER
WIRE DIAMETER .................. .105" - .250"
COIL O.D. ...................... .375" - .4.250"
PRODUCTION, STANDARD ........... | TORRINGTON | $RFQ
Newark, NJ
United States |
 | BAIRD MODEL #4 CHAIN ROLLER AND BUSHING MACHINE
WITH PLAIN REELS
SINGLE PLANE STRAIGHTENER
STOCK CHECK
CUTOFF
FORM POST STRIPPER
BIJUR AUTO LUBE
EQUIPPED WITH:
3 HP 3/60/550 VOLT (850 RPM | BAIRD | $RFQ
Newark, NJ
United States |
 | NILSON #S2F FOUR SLIDE MACHINE WITH PRESS ATTACHMENT
MACHINE No. ............ S2F
MAXIMUM WIRE DIAMETER ............... 3/32"
MAXIMUMWIDTH STRIP METAL ............ 1"
STANDARD FEED LENGTH | NILSON | $RFQ
Newark, NJ
United States |
| NILSON #S-5 FOUR SLIDE
Maximum Diameter Basic Wire 3/8" (.375)
Maximum Width Strip Metal 2 3/8"
Standard Feed Length 24"
Standard Slide Strokes
Front 2 1/ | NILSON | $RFQ
Newark, NJ
United States |
 | BAIRD Model# 3-24 FOUR SLIDE MACHINE
MACHINE No. ............... 3-24
MAX DIA. STEEL WIRE ....... 3/16"+
STD. WIDTH RIBBON METAL ... 1-1/8"+
ROLL STRAIGHTENER ......... 4-1 | BAIRD | $RFQ
Newark, NJ
United States |
 | BAIRD Model# 2 FOUR SLIDE MACHINE
MACHINE No. ............... 2
MAX DIA. STEEL WIRE ....... 1/8"
STD. WIDTH RIBBON METAL ... 1"
ROLL STRAIGHTENER ......... 3-14"
M | BAIRD | $RFQ
Newark, NJ
United States |
 | BAIRD #1 FOUR SLIDE WIRE FORMER
Maximum wire diameter capacity................ 3/32"
Maximum ribbon width.......................... 3/4"
Feed............................. | BAIRD | $RFQ
Newark, NJ
United States |
 | 6,000 lb., REGAL MODEL #18SPR-ACB UNCOILER / PAYOFF
CAPACITY ....... 6000# (3 ARMS)
COIL ID ........ 14" - 18"
COIL OD ........ 60"
COIL WIDTH ..... 24"
LEAF LENGTH .... 29" | REGAL | $RFQ
Newark, NJ
United States |
 | 1-1/8" SCHUMAG TUBE FINISHING LINE CUT TO FINISH LENGTH OR COIL
DIA. TUBE CAPACITY................ 3/8" TO 1-1/8"
24 ROLL 2 PLANE STRAIGHTENER
FLYING HYD. KNIFE
SPEED CUTTING IN STRAIGHT LENGTHS. 250-7 | SCHUMAG | $RFQ
Newark, NJ
United States |
 | 1-1/8" RUESCH MODEL #207M TUBE STRAIGHTENER, CUT-TO-LENGTH & RECOIL LINE
CAPACITY:
MATERIAL - HARD DRAWN COPPER TUBING
TUBE DIAMETER RANGE - 1/4" TO 1-1/8" MAXIMUM
TUBE WALL THICKNESS - .015" MIN. TO .065& | RUESCH | $RFQ
Newark, NJ
United States |
 | 3" WAGNER THREADER, #WGL/30683
O.A. DIM. - 121" X 46" X 58"
WEIGHT - 5,465 LBS.
EQUIPPED WITH: MOUNTED COOLANT
LUBRICATION PUMP
559 VOLT 1150 RPM 5.5 AM | WAGNER | $RFQ
Newark, NJ
United States |
 | HARTFORD MODEL# A190 THREAD ROLLER
3/16" THREAD DIAMETER
.086" - .190" SCREW DIAMETER
1/8" - 1-1/2" THREAD LENGTH
45-60 PPM
O.A. DIM. 42" X 26" | HARTFORD | $RFQ
Newark, NJ
United States |
 | HOMEMADE WORK TABLE
EQUIPPED WITH A KNIFE THAT IS 9/16" WIDE, DRIVEN BY AN AIR CYLINDER
WITH A 1" STROKE - DOWNACTING. KNIFE RETRACTS FULLY TO PRODUCE 3/8" | Not Specified | $RFQ
Newark, NJ
United States |
 | 1-3/4" STANDARD MODEL #3A, 2-DIE SWAGER
CAPACITY: TUBE .............. 1-3/4"
SOLID ............. 3/8"
DIAMETER THRU HOLE .......... 1-7/8"
MOTOR DATA: 5 HP, 3/60/220/4 | STANDARD | $RFQ
Newark, NJ
United States |
 | 8 ROLL HYDRAULICALLY ADJUSTED SIZING TURKSHEAD
NUMBER OF ROLLS ................... 8 | Not Specified | $RFQ
Newark, NJ
United States |
 | 48" X 20,000# STAMCO SLITTING LINE
Pull Through Design
Complete Line With:
- Loopco L-Type Coil Car
Floor Standing / Self Contained Hydraulics
- Mandrel Uncoiler
Sliding Base
| STAMCO | $RFQ
Newark, NJ
United States |
 | 62" X .250 X 50,000# STAMCO INJECTOR HEAD SLITTING LINE W/ PACKAGING LINE
62" (1574MM) X .250" (6.35MM) X 50,000# (22,680 KG) STAMCO INJECTOR HEAD
SLITTING LINE W/ PACKAGING LINE
General Line Description:
Ma | STAMCO | $RFQ
Newark, NJ
United States |
 | 3/8" x 6' PACIFIC MODEL #375S6ARL HYDRAULIC SHEAR
MAXIMUM CAPACITY ................. 3/8" x 6'
HOLDDOWNS ........................ 7
WIDTH BETWEEN UPRIGHTS ........... 6'3"
THROAT ........ | PACIFIC | $RFQ
Newark, NJ
United States |
| | | | | | | | | | | | |