| Photo: |
Machine Detail: |
Manufacturer: |
Price: |
 | 50,000# AETNA STANDARD TRIPLE DRAW BENCH
50,000 Lbs. Aetna Standard Triple Draw Bench
Tube range OD 2.750" - .960"
Inlet stock length - 55'
Outgoing stock length - 75'
| AETNA STANDARD | $RFQ
Newark, NJ
United States |
 | 33,000# AETNA STANDARD DRAWBENCH
CAPACITY.................. 33,000 LBS.
TYPE...................... DOUBLE CHAIN, CENTER DROP TRIPLE DRAW
MADREL END
MAIN DRIVE................ 1 | AETNA STANDARD | $RFQ
Newark, NJ
United States |
 | 22000 LB., AETNA STANDARD DRAWBENCH
CAPACITY.................. 22,000 LBS.
TYPE...................... DOUBLE CHAIN, CENTER DROP TRIPLE DRAW
MAIN DRIVE................ 100HP/750RPM | AETNA STANDARD | $RFQ
Newark, NJ
United States |
 | 60" X .105" X 40,000# PAXSON CUT-TO-LENGTH LINE
Thickness Range: .105 - .018
Complete Line Featuring:
-L-Type Coil Car
Floor Standing / Self Contained Hydraulics
Mandrel Uncoiler:
Serial N | PAXSON | $RFQ
Newark, NJ
United States |
 | 72" x 0.500" x 60,000# Delta Cut To Length Line
MATERIALS: HR STEEL
MAX. SHEAR: 65,000 PSI
MAX. YIELD: 65,000 PSI
THICKNESS RANGE: 0.125" - 0.550&# | DELTA | $RFQ
Newark, NJ
United States |
 | 60" x 14 Gauge x 30,000 LBS LENNOX CUT-TO-LENGTH LINE
GENERAL MACHINE SPECIFICATIONS:
MANUFACTURER - LENNOX
S/N - CL-7165
MAX COIL WEIGHT - 30,000 LBS
COIL WIDTH RANGE - 12"-60"
MAX THICKNE | LENNOX | $RFQ
Newark, NJ
United States |
 | DAHLSTROM MODEL# 35TP CUTOFF PRESS
DIE ACCELARATOR
UNICO MODEL # SP-1192
MAX LENGRH 35'
MIN LENGTH 3'
MAX SPEED 150 FPM
FLYING CUT OFF
MODEL #35TP
DIE AREA 48"
TONNAGE 35
| DAHLSTROM | $RFQ
Newark, NJ
United States |
 | 2" THERMATOOL / ALPHA DOUBLE CUT CUT-OFF
Year 2000
Flying cut-off
Double cut design
Speed: 400 fpm
Capacity: 25" x 30"
Cutoff capacity: 2"
Dual Column
30' Entry Feed | THERMATOOL | $RFQ
Newark, NJ
United States |
 | 1-1/2" X .094" HAVEN RE-CUT TUBE CUT OFF
Manufacturer: Haven
Model: 871
Serial: 3140
Year: 1992
Max Tube Diameter: 1-1/2"
Wall Thickness: .094"
Hand of operation : left t | HAVEN | $RFQ
Newark, NJ
United States |
 | BARDONS & OLIVER #33 AUTOMATIC CUTOFF MACHINE
CAPACITY ............................... 3"
CUT RUNOUT ............................. 48"
STOCK TABLE ............................ 10' ROLL | BARDONS-OLIVER | $RFQ
Newark, NJ
United States |
 | 80mm Adige Re Cut Machine 2003
Manufacturer: Adige Italy
Year: 2003
Round Min. Diameter: 12mm
Round Max. Diameter: 80mm
Square Range: 10mm x 10mm / 70mm x 70mm
Rectangular: 1 | ADIGE-ITALY | $RFQ
Newark, NJ
United States |
 | 3" Haven Model 873 Re-Cut Machine with Brush De-Burr Unit
Year 2000
3" - 1/2" Round Capacity
2.125" Square Capacity
.120" Max Wall Thickness
2" - 120" Cut Lenghts
Entry T | HAVEN | $RFQ
Newark, NJ
United States |
 | 50 TON x 37' SPAN P & H TOP RUNNING DOUBLE GIRDER OVERHEAD BRIDGE CRANE
Service: "D"
Capacity: 50Ton
Span: 37'
Lift: 22' approx.
Power: 3ph 60hz 460v
Control Point: Pendant
Overhead Clearence : 74"
Si | P-H | $RFQ
Newark, NJ
United States |
| 5TON DESHAZO BRIDGE CRANE
108' Span
DOUBLE CABLE HOIST
CAB AND PENDANT CONTROL
EACH HOOK IS 2-1/2 TON CAPACITY | STON-DESHAZO | $RFQ
Newark, NJ
United States |
 | AUTOMATED CONVEYOR SYSTEMS 16" X 115" FLAT BELT TYPE
BELT AREA ................ 16" X 115"
WEIGHT ................... 225 LBS.
O.A. DIM. ................ 33" X 124" X 35:
EQU | AUTOMATED | $RFQ
Newark, NJ
United States |
 | F.A. WALSH & SONS CHAIN CONVEYOR
ENTRY ................... 8"
DISCHARGE ............... 51"
WIDTH ................... 6"
WEIGHT .................. 175 LBS.
O.A. D | F-A-WALSH-SONS | $RFQ
Newark, NJ
United States |
 | LATE MODEL COMPLETE COPPER & BRASS ROLLING AND CASTING FACILITIES
Late Model Complete Copper & Brass Rolling and Casting Facilities.
28 Million lbs Annual Casting Capacity
20 Million lbs Finished Product Capacity
| Not Specified | $RFQ
Newark, NJ
United States |
 | CONTIROD FACILITY FOR ELECTROLITYC COPPER WIRE
CONSITING OF:
HAZELETT CONTROL CASTING MACHINE
KRUPP (SMS-MEER) ROLLING MILL
(2) MELTING FURNACES
(2) HOLDING FURNACES
ACID PICKLING L | HAZELETT | $RFQ
Newark, NJ
United States |
 | POLYETHYLENE FOAM TUBE EXTRUSION LINES, POLYETHYLENE FOAM/POLYETHYLENE
- 2 POLYETHYLENE (PE) FOAM TUBE EXTRUSION LINES
Polyethylene Foam, Tube Extrusion Line, 2007 - Line #2
Twin screw Extruder, type LMP
DEGA Aspi | Not Specified | $RFQ
Newark, NJ
United States |
 | RUESCH TRAVERSE WELDING WIND LINE
RUESCH 2-ARM TURNSTILE w/POWER ROTATION
CAPACITY : 4000 LBS./ARM
SPOOL O.D. MAX: 44"
SPOOL I.D. : 5"
SPOOL WIDTH : 16-1/2� | RUESCH | $RFQ
Newark, NJ
United States |
| | | | | | | | | | | | |