14" x 40" Enco Engine Lathe, DRO, 3 & 4 Jaw Chucks & More |
|
Stock Code: |
13870 |
Price: | $6,450 |
Subcategory: | Engine Lathes |
Swing: | 14" |
Centers: | 40" |
Manufacturer: |
Enco |
Model: |
01646447 |
Condition: | Used |
.
We are pleased to offer for your consideration:
(1) 14" x 40" Enco Engine Lathe
Stock Number: 13870
List Price: $6,450
Manufacturer: Enco
Model Number: 01646447
Serial Number: 200701
Swing over bedways: 14"(22) 7.5 to 0.45
Swing over cross slide: 8-1/2"
Distance between centers: 40"
Gap length: 9-1/2"
Cross slide travel: 6-1/8"
Compound slide travel: 3-5/8"
Spindle bore: 1-9/16"
Spindle speeds: 330-1800 RPM
Feeds: (40) 0.0011 to 0.0271 IPR
Inch threads: (40) 4 to 112 TPI
Metric threads: (22) 0.45 to 7.5
Z-axis handwheel graduations (inch): 0.005"
Z-axis handwheel graduations (metric): 0.1 mm
X-axis handwheel graduations (inch): 0.001"
X-axis handwheel graduations (metric): 0.02 mm
Compound slide graduations (inch): 0.001"
Compound slide graduations (metric): 0.02 mm
Tailstock handwheel graduations (inch): 0.001" T
ailstock handwheel graduations (metric): 0.02 mm
Bed width: 8"
Bed length: 54"
Leadscrew diameter (Z-axis): 7/8"
Leadscrew pitch (Z-axis): 8 TPI
Tailstock quill travel: 4-5/8" (118 mm)
Tailstock quill diameter: 1.78"
Tailstock quill taper: #3 MT
Motor: 3 HP
Volts: 220
Phase: 1
Frequency: 60 Hz
Current: 14.7 amps
Approximate dimensions: 72" x 30" x 62" high
Approximate weight: 2,200 lbs
Features:
Newall NMS300 2-Axis digital readout system
6" 3-jaw chuck
8" 4-jaw chuck (new in box)
12" faceplate
4-way tool post
Steady rest
Full length rear splash guard
Foot brake
Thread dial
NS Machine Corp
515-999-2999
[email protected]
This machine is listed for sale by NS Machine Corp.
located in Granger, Iowa