buy & sell, new & used machinery, machine tools & equipment

Machine Tools > Rolls

Metal Rolls for Sale

253 new & used metal rolls items for sale
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>
Refine: Viewing 101 - 120 of 253 matches
Sort by:
Items Per Page:  20  |  50 |  100
Reuland Tank Turning Rolls Roller
$2,000
Reuland Tank Turning Rolls Roller
Reuland Magnetic Brake Patent No. 2725123 PH-3 HZ-60 Volts-230 Type-OLDA Model-2986 www.powermechanical.com
WYSONG TC672 TRU CIRCLE PLATE ROLL
$RFQ
WYSONG TC672 TRU CIRCLE PLATE ROLL
MODEL: TC672 CAPACITY 14 GAUGE LENGTH OF ROLLS . 76-1/2" DIAMETER OF ROLLS . 6" AIR DROP END YES REAR ROLL ADJUSTMENT POWER 1 SHOT LUBE . YES PASS LINE HEIGHT 41" E STOP YES MOTOR . 7-1/2 HORSEPOW
WEBB BENDING ROLLS
$RFQ
WEBB BENDING ROLLS
YEAR: 1976 BENDING ROLLS 1/8" X 96" CAPACITY. MACHINE CAN BEND THICKER METAL BASED ON WIDTH FOR EXAMPLE 1/4" X 5' CAN ALSO BE ROLLED. HAS POWER BACK ROLL AND AIR POWERED DROP EXCELLENT CONDITION.
J.M. MONTGOMERY MDL 72-16 PINCH PINCH ROLL
$RFQ
J.M. MONTGOMERY MDL 72-16 PINCH PINCH ROLL
MODEL: MDL 72-16 PINCH YEAR: 1999 J.M. MONTGOMERY RATED CAPACITY,,,,,,,,,,,6' X 16 GA DIAMETER ROLLS,,,,,,,,,,, 3" HYDRAULIC DRIVE HYDRAULIC DROP END HYDRAULIC POWER ADJUSTMENT OF REAR BENDING ROLL MOTO
Heller EH-320D Bending Roll
$RFQ
Heller EH-320D Bending Roll
MODEL: EH-320D YEAR: 1996 HYDRAULIC (4) ROLL PLATE BENDING ROLL MATERIAL CAPACITY: 3/4" (MILD STEEL) OVERALL LENGTH OF ROLLS: 120" PRE BEND: 5/8" TOP ROLL DIAMETER: 13.78" CENTER ROLL DIAMETER:
FARMHAM 2015-EXXXX STRECH FORMING ROLL
$RFQ
FARMHAM 2015-EXXXX STRECH FORMING ROLL
60,000 P.S.I. ROLL DIAMETER: TOP ROLL . 2-11/16” BOTTOM ROLL 3-5/16” TOP ROLL LIFT MOTORS GEARED MOTOR TO SCREW LOCATED ON EACH END. WITH MANUAL OVERRIDE ADJUSTMENT MECHANICAL COUNTER FOR EACH END OF TOP ROLL BO
AMERECON INITIAL PINCH PLATE ROLLS
$RFQ
AMERECON INITIAL PINCH PLATE ROLLS
YEAR: 1999 1/4" X 5' AMERECON INITIAL PINCH PLATE ROLLS W/ POWER RR ADJUST SPECIFICATIONS: CAPACITY 5' X 1/4" MILD STEEL ROLL DIAMETER 6.7" ON ALL 3 ROLLS SPEED 12.5 F.P.M MAIN DRIVE MOTOR
BOLDRINI Mdl#PSI-3650X152, 6" X 12' 3-ROLL PLATE BENDING ROLL
$RFQ
BOLDRINI Mdl#PSI-3650X152, 6" X 12' 3-ROLL PLATE BENDING ROLL
SPECIFICATIONS: SERIAL NO .3656 CAPACITY: PRE-BEND ROLLING CAPACITY 6" X 144" OVERALL LENGTH OF ROLLS 156" TOP ROLL DIAMTER 48" BOTTOM ROLL DIAMETER 45.85"
6' x .250, BENDMAK, #CYL-ST 190/20, 7.48" rolls, 15 fpm, 5.5 HP, NEW
$RFQ
6' x .250, BENDMAK, #CYL-ST 190/20, 7.48" rolls, 15 fpm, 5.5 HP, NEW
STANDARD FEATURES: Top and pinch rolls driven via electric motor Forward and reverse rotation controlled by foot pedal Top rolls release for ease of part removal complete with electric interlock Powered adjustment
5' x .282", BENDMAK, #CYL-ST 170/15, 6.69" rolls, 15 fpm, 5.5 HP, NEW
$RFQ
5' x .282", BENDMAK, #CYL-ST 170/15, 6.69" rolls, 15 fpm, 5.5 HP, NEW
STANDARD FEATURES: Top and pinch rolls driven via electric motor Forward and reverse rotation controlled by foot pedal Top rolls release for ease of part removal complete with electric interlock Powered adjustment
48" x 16 ga., NATIONAL, No. NR4816, powered, 3" rolls, 1 HP, New
$RFQ
48" x 16 ga., NATIONAL, No. NR4816, powered, 3" rolls, 1 HP, New
OPTIONAL ACCESSORIES: Wire groove, 3/8", 1/2" or 5/8" . . . . . . . . . . . . . . . . . . $ 680.00 FEATURES: National's 3" power rolls are designed for simple operation. Standard with forward a
3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
$RFQ
3' x 9/32", EAGLE, No. A314-10/7, 5.9" rolls, 13 fpm, 6 HP, NEW
OPTIONAL ACCESSORIES: Cone bending device . . . . . . . . . . . . . . . . . . . . . . . . $ 700.00 Induction hardened rolls. . . . . . . . . . . . . . . . . . . . . . 880.00 Shaft extension for section bending r
3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
$RFQ
3' x 1/4", EAGLE, No. TSI 3/1, 5.35" rolls, 14 fpm, 4 HP, NEW
TSI 3/1 STD, 3' x 1/4" equipped with cone device, extended shafts and oil tank full . . . . . . . . . . . . . . . . . . . $17,100.00 TSI 3/1 EXP, 3' x 1/4" equipped with mobile console with push buttons, co
EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
$RFQ
EAGLE, 2 1/4" X 2 1/4" X 1/4", CPS-50-REV, hydraulic, 3 rolls driven vari s
OPTIONAL ACCESSORIES: Rolls for sch 40 pipe--2" . . . . . . . . . . . . . . . . . . . POR Inland freight from Stapleton, AL . . . . . . . . . . . . . . 800.00 Rolls for angle iron leg out/in . . . .
BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NE
$RFQ
BENDMAK, 4" x 4" x 3/8", PRO-100, hyd, 3 rolls driven, 15 HP, DP design, NE
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
$RFQ
BENDMAK, 3" x 3" x 3/8", PRO-80, hyd, 3 rolls driven, 7.5. DP design, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 2" x 2" x 1/4", PRO-60, hyd, 3 rolls driven, 5 HP, DP design, NEW
$RFQ
BENDMAK, 2" x 2" x 1/4", PRO-60, hyd, 3 rolls driven, 5 HP, DP design, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
$RFQ
BENDMAK, 2" x 2" x 1/4", PRO-55, hyd, 3 rolls driven, 3 HP, DP design, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C Manually operated, four directional guide rolls including leg-in angle attachment. . . . . . . . . . . . . . . . . . $
BENDMAK, 2" x 2" x 3/16", PRO-50, hyd, 3 rolls driven, 3 HP motor, NEW
$RFQ
BENDMAK, 2" x 2" x 3/16", PRO-50, hyd, 3 rolls driven, 3 HP motor, NEW
OPTIONAL ACCESSORIES: Digital readout indicating position of adjustment top roll. . . N/C TECHNICAL SPECIFICATIONS: Shaft diameters--top 2" (50mm) --lower 1.6&
16 GA x 36" Niagara Initial Pinch Power Bending Roll
$2,950
16 GA x 36" Niagara Initial Pinch Power Bending Roll
16 Ga Capacity Mild Steel 36" Roll Length 3" Diameter Rolls Manual Adjustment Manual Drop End Forward/Reverse Runs Well Inspect Under Power in Our Branchburg NJ Warehouse
Related Subcategories:
Categories:
Condition:
Manufacturer:
Location:
Price:
  •  to 
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | Next>